3 Touch
c
or
d
to select an appropriate
setting for polarity.
Each time you touch
c
or
d
switches between
the following polarity:
!
BATTERY
When the polarity of the con-
nected lead is positive while the gear shift
is
REVERSE (R)
position
!
GND
When the polarity of the connected
lead is negative while the gear shift is
RE-
VERSE (R)
position
Setting the automatic open
function
To prevent the display from hitting the shift
lever of an automatic vehicle when it is in
P
(park) position, or when you do not wish the
display to open/close automatically, you can
set the automatic open function in the manual
mode.
Furthermore, to adjust the LCD panel slide po-
sition, you can turn the set back on or off.
1 Touch A.MENU and SETUP and then
touch FLAP SET.
2 Touch
a
to turn the set back on, and
the LCD panel slides to the back.
#
To turn the set back off, touch
b
and the LCD
panel slides to the front.
3 Touch
c
or
d
to select the display to
open/close automatically or manually.
Touch
c
to select
MANUAL
, and you have to
press
OPEN/CLOSE
to open/close the display.
Touch
d
to select
AUTO
, and the display auto-
matically opens/closes when power to this
unit is turned on.
Setting the clock
Use these instructions to set the clock.
1 Touch A.MENU and SETUP and then
touch CLOCK ADJ.
2 Touch OFF to turn the clock display on.
ON
will appear in the display instead of
OFF
.
Clock display is now on.
#
You can also turn the clock display on or off by
pressing
FLIP DOWN/CLOCK
when the LCD
panel is closed.
#
To turn the clock display off, touch
ON
.
3 Touch
c
or
d
to select the segment of
the clock display you wish to set.
Each time you touch
c
or
d
will select one
segment of the clock display:
Hour
Minute
As you select segments of the clock display
the segment selected will be highlighted.
4 Touch
a
or
b
to set the clock.
Each time you touch
a
will increase the se-
lected hour or minute. Each time you touch
b
will decrease the selected hour or minute.
Notes
!
You can match the clock to a time signal by
touching
JUST
.
If the minute is
00
29
, the minutes are
rounded down. (e.g.,
10:18
becomes
10:00
.)
If the minute is
30
59
, the minutes are
rounded up. (e.g.,
10:36
becomes
11:00
.)
!
Even when the sources are off, the clock dis-
play appears on the display.
Other Functions
En
79
Section
17
Other
Functions
