3
Connecting the Units
Connecting the power cord
ENG/MASTER 96 INST
4
<CRD4197-A> 4
Yellow
Connect to the constant
12 V supply terminal.
Fuse holder (10 A)
Red
Connect to terminal controlled by
ignition switch (12 V DC).
Black (chassis ground)
Connect to a clean, paint-free
metal location.
White
White/black
Gray
Gray/black
Green
Green/black
Violet
Violet/black
Front speaker
Rear speaker
Front speaker
Rear speaker
Fuse resistor
Multi-CD player
(sold separately)
IP-BUS cable
Left
Right
+
≠
+
≠
+
≠
+
≠
Yellow/black
If you use an equipment with Mute function, wire
this lead to the Audio Mute lead on that equipment.
If not, keep the Audio Mute lead free of any connections.
This product
IP-BUS input (Blue)
Violet/white
Of the two lead wires connected to the back lamp, connect the one in
which the voltage changes when the gear shift is in the REVERSE (R)
position. For details, see Fig. 4
15 cm