background image

DDJ-SX2

Press the [FLIP START] button while pressing the [SHIFT] button.

The Flip playback is finished to go back to a normal playback.

DDJ-SZ / DDJ-SX / DDJ-SR / DDJ-SP1

Press the [PARAMETER (right)] button while pressing the [SHIFT] button.

The Flip playback is finished to go back to a normal playback.

You can also use performance pads to finish a Flip.

Please see the section [Using Saved Flip] for further details.

Saved Flip cannot be used in the DUAL DECK mode on DDJ-SX and DDJ-SX2.

For the 3 controllers, DDJ-SX, DDJ-SR, and DDJ-SP1, as the

[HOT CUE] mode button is lit in the same way both in HOT CUE and SAVED

FLIP mode, it is difficult to identify which mode is currently selected.

You need to be very careful not to mix up with the both modes. 

Finishing a Flip

DDJ-SX2

Using Saved Flip

Using performance pads to save a created Flip

SAVED FLIP mode on DDJ-SX2 and DDJ-SZ

HOT

 

CUE

HOT CUE mode on DDJ-SX

(For DDJ-SR and DDJ-SP1, use the [HOT CUE] 

mode button in the same location as in the above.)

DDJ-SZ

(Also for DDJ-SX, DDJ-SR, and DDJ-

SP1, use the [PARAMETER (right)] 

button.)

8

1)

Follow the steps in [Creating a Flip using Serato Flip] in the section 

[Using Serato Flip] to create a Flip.

2)

Press the [HOT CUE] mode button when Hot Cue mode is selected on the

controller. SAVED FLIP mode is activated.

If you press the [HOT CUE] mode button again, it will be switched back 

3)

Press either one of the performance pads 1 ~ 6 to save a Flip to a slot.

to the Hot Cue mode.

When the performance pad 1 is pressed, a Flip is saved in Slot 1. 

During SAVED FLIP mode, the LED of the [HOT CUE] mode button

on DDJ-SX2 and DDJ-SZ is changed to light blue. 

If no vacant slot exists, a Flip cannot be saved by pressing the 

performance pad. Click the Flip slot delete button to delete any Flip 

in a slot on the GUI. 

Using performance pads to save a created Flip
to a slot

HOT CUE mode on DDJ-SX2 and DDJ-SZ

SAVED FLIP mode on DDJ-SX

(For DDJ-SR and DDJ-SP1, use the [HOT CUE] 

mode button in the same location as in the above.)

8

Содержание Serato Flip












Отзывы: