39
03
Connecting your equipment
Secondary MULTI-ZONE setup (ZONE 3)
1 Connect a separate amplifier to the AUDIO ZONE 3 OUT jacks on this receiver.
You should have a pair of speakers attached to the sub zone amplifier as shown in the following illustration.
2 Connect a TV monitor to the VIDEO ZONE 3 OUT jack on this receiver.
ZONE 3
OUT
ZONE 3
OUT
R
L
AUDIO IN
Sub zone (
ZONE 3
)
Main zone
VIDEO IN
2
1
Secondary MULTI-ZONE setup using speaker terminals (ZONE 3)
You must select
5.1ch + ZONE 2+3
in
Speaker system setting
on
page 97
to use this setup.
1 Connect a pair of speakers to the front wide speaker terminals.
You should have a pair of speakers attached to the sub zone amplifier as shown in the following illustration.
2 Connect a TV monitor to the VIDEO ZONE 3 OUT jack on this receiver.
R
Sub zone (
ZONE 3
)
Main zone
L
FRONT WIDE /
B
R
L
FRONT WIDE /
B
R
L
ZONE 3
OUT
ZONE 3
OUT
VIDEO IN
2
1
MULTI-ZONE setup using HDMI terminal (ZONE 4)
Important
!
HDMI
IN 6
and
IN 7
cannot be selected for
ZONE 4
. (In the same way, inputs for which
HDMI
IN 6
or
IN 7
is
assigned cannot be selected.)
!
To use the
ZONE 4
functions, set
Control
or
Control Mode
in
HDMI Setup
to
OFF
. For details, see
HDMI
Setup
on
page 69
.
%
Connect a separate receiver to the HDMI ZONE 4 OUT jack on this receiver.
Connect speakers and a TV to the Zone 4 receiver as shown on the illustration below.
ZONE 4
OUT
ZONE 4
OUT
HDMI IN
Sub zone (
ZONE 4
)
Main zone
