Pioneer SBX-N500, Руководство по эксплуатации

Страница: 34 / 68

Basic operations 34
En
Basic oper
ations
3
Connect using mobile device’s
Wi-Fi Direct function
You can connect using a Wi-Fi Direct function,
if your mobile device has one.
Press
Wi-Fi Direct
to display the Wi-Fi Direct/
Miracast mode screen.
1. Turn on the Wi-Fi Direct setting on your
mobile device.
2. Select the device name “DIRECT-xxSB”
for the unit appearing on the TV screen
from the list displayed on your mobile
device.
The
“
xx” indicates the identification
character for the device.
Caution
• If the unit’s device name “DIRECT-xxSB” is not
displayed on the mobile device or a connection is
not possible, resolve the problem by doing one of
the following.
– Press an input selection button, and then press
Wi-Fi Direct
, and perform the procedure again
from the Wi-Fi Direct/Miracast mode screen.
– Use
c
/
d
to select [Refresh], then press ENTER .
Note
• Please see the manual for your mobile device for
details on how to operate it.
• When connected using the Wi-Fi Direct function
of a mobile device, the DLNA application to be
used must also be compatible with a Wi-Fi Direct
connection.
Playback photos, music and
video files from a mobile
device
Send photos, music and video files from a
mobile device to the unit.
Note
• Please see the manual for your mobile device for
details on how to operate it.
• Depending on the mobile device you are using, you
may need to first install software before you can
send photos, music and video files.
Connecting by Miracast
You can connect to your mobile device if it has
the Miracast function.
Press
Wi-Fi Direct
to display the Wi-Fi Direct/
Miracast mode screen.
1. Turn on the Miracast setting on your
mobile device.
A list of the devices that can be connected
to the mobile device is displayed on the
mobile device screen.
2. Select the device name “DIRECT-xxSB”
for the unit appearing on the TV screen
from the list displayed on your mobile
device.
The
“
xx” indicates the identification
character for the device.
Caution
• If the unit’s device name “DIRECT-xxSB” is not
displayed on the mobile device or a connection is
not possible, resolve the problem by doing one of
the following.
– Press an input selection button, and then press
Wi-Fi Direct , and perform the procedure again
from the Wi-Fi Direct/Miracast mode screen.
– Use
c
/
d
to select [Refresh], then press ENTER .
Note
• Please see the manual for your mobile device for
details on how to operate it.
72-MCS838-EU0B2_En.indd 34 2013/09/05 11:57:00