Operations
13
En
Adjusting the sound
delay time
(LIP SYNC (AUDIO SYNC) )
Adjust the sound delay time to sync the sound
with the images.
The default setting is 0.
1 Press
LIP SYNC
for at least 3 seconds.
The unit enters lip sync adjustment mode.
2 Press
/–
to adjust the delay
time (press + to increase the delay
time).
The indicator lighting state varies depending
on the setting value.
For the indicator operation, refer to Unit
indicator operation (page 18).
3 Press
LIP SYNC
to end lip sync
adjustment mode.
Switching the power
to standby mode
automatically
(Auto Power Off)
The unit can be automatically switched to
standby mode when there is no signal and
30 minutes elapses without any operation
being performed.
The default setting is ON.
1 Press
u
STANDBY/ON
on the unit to turn
off the power.
2 Press
u
STANDBY/ON
for at least 3
seconds while pressing
VOLUME –
on the
unit.
When this is turned on, the
2
/DTS
indicator lights green.
Perform the same operation again to turn
the function off.
Enjoying music on
Bluetooth
®devices
Music on
Bluetooth
devices such as the
following can be enjoyed wirelessly with the
unit.
•
Bluetooth
devices: Cell phone
•
Bluetooth
devices: Digital music player
•
Devices without
Bluetooth
function: Digital
music
Bluetooth
audio transmitter
(commercially available)
Listening to music on
Bluetooth
devices
Pairing the unit and the
Bluetooth
device
(initial registration)
Pairing is required to enjoy the music on a
Bluetooth
device with the unit. Perform pairing
the first time you use a
Bluetooth
device or
when the pairing data has been deleted from
the
Bluetooth
device.
Before starting the pairing operation, check
that the
Bluetooth
function on the
Bluetooth
device is turned on. For details, refer to the
operating instructions for the
Bluetooth
device.
Once the pairing operation is performed, it
does not need to be performed again.
1 Press the
BT AUDIO
.
The
BT AUDIO
indicator flashes.
2 Perform the pairing operation on the
Bluetooth device.
•
When you search for the unit from the
Bluetooth
device, depending on the type
of
Bluetooth
device, a list of connection
(waiting) devices may be shown on the
display of the
Bluetooth
device (the name
shown for this unit on the display will be
[SBX-300]).
•
With
Bluetooth
version 2.0 or lower, a PIN
code needs to be entered.
– The PIN code of the unit is fixed to 0000.
3 The
BT AUDIO
indicator lights. Check
that pairing between the unit and
Bluetooth device was successful.
The reception range between the
Bluetooth
device and unit is up to 10 m. (This value
is for use in an open space. The reception
range may vary depending on whether walls
or other structures are present.)
Note
•
The pairing method may vary depending on the
type of
Bluetooth
device.
•
When 5 minutes elapse in pairing mode, the unit
enters connection standby mode. To perform
pairing again, press
BT AUDIO
on the remote
control.
