Controls and displays
03
31
En
1
CHANNEL indicators
Light to indicate the selected channel.
2
CHANNEL
The default setting is
CH1
. In case of poor
reception due to interference from other
electrical devices, you can improve reception
by selecting another channel. Each time you
press the button, the channel changes
sequentially:
• Poor reception may cause the audio to be
interrupted or stopped. This is not a
malfunction. Try changing the location or
orientation of the transmitter and/or the
wireless speaker to improve reception.
3
Antenna
Transmits signals to the wireless speaker.
4
POWER
Press to switch the unit on or off.
5
TUNED indicator
Lights when the signal from the transmitter is
properly received.
6
WIRELESS MODE
Slide to select either
SURROUND
or
STEREO
mode.
•
SURROUND
— Sounds going to the
surround left and right channels are
heard through the wireless speakers.
•
STEREO
— Any source playing through
the main system is heard in stereo
through the wireless speakers
(multichannel sources will be downmixed
to stereo).
• Make sure to stop the DVD receiver when
switching between modes.
• If the mode of the wireless speaker
system and the mode of the DVD receiver
do not match, loud noise may be emit
from the wireless speaker system.
• The
STEREO MODE VOLUME
control
can be used to adjust the volume when
STEREO
is selected.
7
CHANNEL
The default setting is
AUTO
, and unless you
experience poor reception due to your
listening environment, you should leave it set
to
AUTO
.
If you are experiencing poor reception, you
can improve the reception of the receiver by
switching to
MANUAL
and selecting an
appropriate frequency using the
CHANNEL
button on the transmitter. Press and hold for
more than 5 seconds to switch between
AUTO
and
MANUAL
.
When set to
MANUAL
, the
CHANNEL
changes subsequently as follows each time
you press the
CHANNEL (AUTO/MANUAL)
button:
Press the
CHANNEL (AUTO/MANUAL)
button until the same channel as the
transmitter is selected and the sound quality
improves.
The reception channel is temporarily locked
when set to
AUTO
. When the power is turned
off, the
CHANNEL (AUTO/MANUAL)
setting
reverts to
AUTO
.
CH 2
CH 3
CH 4
CH 1
CH 2
CH 3
CH 4
CH 1
XV-HDT530.book 31 ページ 2003年5月10日 土曜日 午後4時6分
Содержание S-HTD530
Страница 103: ...XV HDT530 book 103 ページ 2003年5月10日 土曜日 午後4時6分 ...