Using the tape deck
08
51
En
Reducing the source signal level
• Default setting:
ATT 6DB
Some auxiliary sources may produce a high
signal level which may produce unpleasant
distortion if recorded on the built-in tape
recorder. In such cases, you may need to
reduce the signal level of the line source by
switching on the attenuator.
1
Switch the system into standby.
2
Press ENTER.
3
Use the
/
(cursor left/right)
buttons to select the attenuation (LINE
ATT) display.
On the front panel use
and
.
4
Press ENTER.
The current setting is shown in the display.
5
Use the
/
(cursor up/down)
buttons to select a setting.
On the front panel use
and
.
•
ATT 6DB
– Lowers source signal by 6dB
•
ATT 10DB
– Lowers source signal by
10dB (
EV61 DVD model only
)
•
ATT OFF
– Switches attenuation off
6
Press ENTER to confirm.
XV-EV51.book 51 ページ 2003年5月6日 火曜日 午後2時31分
Содержание S-EV31V
Страница 99: ...Additional information 17 99 En ...