Pioneer S-EV31V, Инструкция по эксплуатации

Страница: 50 / 100

Using the tape deck 08
50
En
8 Start the source playing (if necessary).
9 When you’re ready to stop recording,
press REC/STOP again.
Automatically recording CDs
(ASES)
Auto Synchro Editing System (ASES for short)
makes recording CDs (including those with
WMA/MP3 audio files) automatic. It also
makes sure that a CD track isn’t spread over
two sides of a tape.
If the tape runs out midway through a CD
track, the same track is automatically
recorded from the beginning again on the
other side.
1 Prepare the tape deck for recording.
Load a blank cassette and switch Dolby NR on
or off as required. Recording starts in the
(forward) direction, so take care which way
you load the tape.
2 Load the CD you want to record.
3 Press the DVD/CD button, then press
(stop).
The CD should now be selected, but not
playing.
If you want to record the tracks in a different
order, or record only one track, use the
program play feature—see page 37 for how to
make a program list. Make sure playback is
stopped before going to the next step.
4 Press ASES to start recording.
The
ASES
indicator lights, followed by a 4
second pause while the tape winds past the
leader, then recording starts.
Recording finishes automatically when the
end of the disc is reached, or the tape ends
(whichever comes first).
5 If you want to stop recording before
the end of the CD, press (stop).
• ASES may not work correctly if the first
side of the tape finishes at the same time
as a track ends. If this happens, stop the
recording then resume on the other side
without ASES.
• You can’t make ASES tape recordings of
Video CD/Super VCDs or DVD-Video
discs.
Improving AM tape recordings
• Default setting: B.CUT 1
Recording AM broadcasts on cassette tape
can result in noisy recordings. If you
experience this, change the beat cut mode.
1 Switch the system into standby.
2 Press ENTER.
3 Use the
/
(cursor left/right)
buttons to select BEAT CUT.
On the front panel use and .
4 Press ENTER.
The current setting is shown in the display.
5 Use the
/
(cursor up/down)
buttons to select B.CUT 1 or B.CUT 2.
On the front panel use and .
6 Press ENTER to confirm.
B.CUT lights in the display when B.CUT 2 is
selected.
XV-EV51.book 50 ページ ２００３年５月６日 火曜日 午後２時３１分