manualshive.com logo in svg
background image

English

  Precautions before installation (II)

   

 CAUTION

 

• 

Do not install this product where it may: 
(i) obstruct the driver’s vision, 
(ii) impair the performance of any of the vehicle’s operating 
systems or safety features, including airbags, hazard lamp 
buttons or  
(iii) impair the driver’s ability to safely operate the vehicle.

• 

Consult with your nearest dealer if installation requires 
drilling holes or other modifications of the vehicle.

• 

Before making a final installation of this product, 
temporarily connect the wiring to confirm that the 
connections are correct and the system works properly.

• 

Do not install this product in places subject to high 
temperatures or humidity, such as: 
- Places close to a heater, vent or air conditioner. 
- Places that may be exposed to rain, such as close to the 
door or on the vehicle’s floor.

  Notes

  

• 

The security mode can be set to on or off. 

→ “This Product Settings” - “Configurable Features” - 

“Parking Mode” - “Security mode”

• 

In the security mode, this product runs in the low power 
consumption mode to reduce the risk of the battery 
running flat.

• 

When the battery voltage drops below 11.2 V, security 
mode standby and recording are stopped.

• 

The security mode starts recording within three seconds of 
detection of impact.

• 

Vibration that is detected for approximately three minutes 
before the vehicle’s engine is turned on (ACC ON) is not 
covered by the notification message display feature.

• 

The security mode is a feature for starting up and 

activating this product after an impact is detected. For this 

reason, the battery might wear more quickly if this product 
is used in mechanical multi-story parking garages or 
location subjected to lots of vibration. When parking in 
locations such as these, set the security mode to off before 
using this product.

• 

The parking mode (security mode allowing 24-hour, 365-
day surveillance) can be used by extracting 
power directly from the vehicle by the power / AV cable. 
You can also connect the product to navigation by the 
power / AV cable to project realtime video from this 
product or movies and photos that are being played back 
on the screen of the navigation.

  Disclaimer

  

• 

Given the large number of variables and conditions that 
can be involved in an accident, Pioneer cannot guarantee 
that every accident or occurrence will trigger the recording 
feature in this device.

• 

Pioneer Corporation accepts no responsibility whatsoever 
for product failures or damage that occur due to this 
product.

  24/7 Security Mode

  

• 

If the pre-set operation time elapses when the security 
mode is turned ON, the security mode in which parking 
surveillance is performed 24 hours per day, 365 days per 
year is automatically activated. When this device detects 
vehicle movement caused by vibration while the security 
mode is activated, that event is saved for the set normal 
video time after the moment of detection as a parking 
mode file, and a notification message is displayed at the 
next startup.

Отзывы: