Pioneer PRS-D5000SPL, Руководство по обслуживанию

Страница: 27 / 27

27
5
6 7 8
F
E
D
C
B
A
5 6 7 8
PRS-D5000SPL/X1H/EW
8. OPERATIONS
Bass Boost Frequency Control
Y
ou can select a bass boost frequency
from 40 to 120 Hz with the bass boost control.
Power Indicator
The power indicator lights when the power is switched on.
Bass Boost Level Control
Bass boost level control can boost the level around the frequency selected by the bass boost frequency control from 0 to 12 dB.
Cut Off Frequency Control for LPF
Y
ou can select a cut of
f frequency from
40 to 240 Hz.
Gain Control
If the sound level is too low
, even when
the volume of the car stereo used along with this power amplifier is turned up, turn gain control on the front of the power amplifier clockwise. If the sound distorts when the volume is turned up, turn the gain control counter
-clockwise.
•
W
hen using with an RCA equipped
car stereo (standard output of 500 mV), set to the NORMAL position. When using with an RCA equipped Pioneer car stereo with max. output of 4 V or more, adjust level to match the car stereo output level.
•
For synced amplifier
’s
gain control,
see the “Setting the Gain for synced amplifier” section.
BFC (Beat Frequency Control) Switch
If you hear a beat while listening to an MW/L
W broadcast with your car stereo,
change the BFC switch using a small standard tip screwdriver
.
Slope Select Switch
Y
ou can select a slope for the LPF from
–18 and –24 dB.
Subsonic Select Switch
The subsonic filter cuts inaudible fre- quencies below 20 Hz to eliminate unwanted vibrations and minimize power loss.
MODE SELECT Switch
Y
ou can select amplifier
’s
sync mode
from MASTER, SYNC and SYNC INV
.
For the position of the MODE
SELECT
switch, see the “Connecting the Speaker wires” section.
(EW model)