4
1
2
5
6
3
1
High-range speaker left
2
High-range speaker right
3
Middle-range speaker right
4
Middle-range speaker left
5
Low-range speaker left
6
Low-range speaker right
High-range speaker left
High-range speaker
right
Middle-range speaker right
Middle-
range speaker left
Low-range speaker left
Low-range speaker right
1
2
4
3
5
1
Front speaker left
2
Front speaker right
3
Rear speaker right
4
Rear speaker left
5
Subwoofer
Front speaker left
Front speaker right
Rear
speaker right
Rear speaker left
Subwoofer
#
You cannot select subwoofer when the sub-
woofer output is off.
#
You cannot adjust the time alignment when
neither
Front Left
nor
Front Right
is selected in
the position selector mode.
5 Press
a
or
b
to adjust the distance be-
tween the selected speaker and the listen-
ing position.
Each press of
a
or
b
increases or decreases
the distance.
400.0cm
0.0cm
is displayed as the distance
is increased or decreased, if you have selected
centimeters (
cm
).
160inch
0inch
is displayed as the distance
is increased or decreased, if you have selected
inches (
inch
).
#
You can adjust the distance for the other
speakers in the same way.
6 Press BAND to cancel the time align-
ment mode.
About the network
function
The network function lets you divide the audio
signal into different frequency bands, and
then reproduce each of them through sepa-
rate speaker units.
You can then make precise adjustments to the
reproduced frequency band (with a low-pass
filter or high-pass filter), level, phase and other
parameters to match the characteristics of
each speaker unit.
Audio Adjustments
En
43
English
Section
08