Initial Settings
En
39
Notes
• Even if you change this setting, there is no
output unless you switch the non fading out-
put (refer to page 35) or subwoofer output
(refer to page 34) in the audio menu on.
• If you change the subwoofer controller, sub-
woofer output and non fading output in the
audio menu return to the factory settings.
• Both rear speaker leads output and RCA rear
output are switched simultaneously in this
setting mode.
1 Press
FUNCTION
to select
SW
.
Press
FUNCTION
repeatedly until
Rear SP
appears in the display.
2 Change the rear output setting with
5
/
∞
.
Pressing
5
/
∞
will switch between
Rear SP
:FULL
(full-range speaker) and
Rear SP :S.W
(subwoofer) and that status will be displayed.
Notes
• When no subwoofer is connected to the rear
output, select
Rear SP:FULL
.
• When a subwoofer is connected to the rear
output, set for subwoofer
Rear SP:S.W
.
• When the rear output setting is
Rear SP:S.W
,
you cannot change the subwoofer controller.
3 Change the subwoofer controller with
2
/
3
.
Pressing
2
/
3
will switch between
S.W Control
:INT
and
S.W Control :EXT
and that status will
be displayed.
Switching the Telephone
Muting/Attenuation
Sound from this system is muted or attenuated
automatically when a call is made or received
using a cellular telephone connected to this
product.
1 Press
FUNCTION
to select
TEL
.
Press
FUNCTION
repeatedly until
Telephone
appears in the display.
2 Switch the telephone muting/attenuation
with
2
/
3
.
Pressing
2
/
3
will switch between
Telephone
:ATT
(attenuation) and
Telephone :MUTE
(mut-
ing) and that status will be displayed.
English
Español
Deutsch
F
rançais
Italiano
Nederlands
08
Section