<ENGLISH>
Connecting the Units
Note:
Change the Initial Setting of this product. (Refer to the
Operation Manual.) The subwoofer output of this unit
is monaural.
Blue/white
To system control terminal of the power amp or
Auto-antenna relay control terminal (max. 300mA
12 V DC).
Right
Front speaker
White
Gray
White/black
Green
Green/black
Gray/black
Violet
Violet/black
Front speaker
Left
Yellow
To terminal always supplied
with power regardless of
ignition switch position.
Black (ground)
To vehicle (metal) body.
Red
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Orange/white
To lighting switch terminal.
Subwoofer
Subwoofer
Fuse
IP-BUS cable
IP-BUS input (Blue)
This Product
Antenna jack
Subwoofer output
Subwoofer output
15 cm
Multi-CD player
(sold separately)
Front output
15 cm
Fig. 3
Blue/white
To system control terminal of the power amp or
Auto-antenna relay control terminal (max. 300mA
12 V DC).
Connecting cords with RCA pin plugs
(sold separately)
System remote control
Right
Front speaker
White
Gray
White/black
Green
Green/black
Gray/black
Violet
Violet/black
Front speaker
Left
Perform these connections when using a
different amp (sold separately).
With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Yellow
To terminal always supplied
with power regardless of
ignition switch position.
Black (ground)
To vehicle (metal) body.
Red
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Orange/white
To lighting switch terminal.
Rear Speaker
Rear Speaker
Front speaker
Front speaker
Rear Speaker
Rear Speaker
Power amp
(sold separately)
Power amp
(sold separately)
Power amp
(sold separately)
Fuse
IP-BUS cable
IP-BUS input (Blue)
This Product
Antenna jack
Rear output
Subwoofer output
or Non-fading output
15 cm
Multi-CD player
(sold separately)
Front output
15 cm
Subwoofer
Subwoofer
Fig. 2
7
When not connecting a rear speaker lead to a Subwoofer
7
When using a Subwoofer without using a different amp (sold separately)
