Pioneer PLX-1000 Скачать руководство пользователя страница 12

Страница: 12 / 44

PLX-1000

5. DIAGNOSIS

5.1 TROUBLESHOOTING

Yes

Securely plug in the Power cord.

The unit is not turned O

Is the Power cord

securely plugged in?

The specified rotation speed
cannot be changed.

The proper voltage (3.3

) may not

be output from IC309 on the MAI

PCB Assy.

Check that there is proper
conduction between the plane
of IC309 on the MAI

PCB Assy

and G

o LEDs light nor do keys work

even after the PO

ER switch is

turned.

o Switch the voltage selector

properly.

If voltage ranging from 110 to 120

is input

with the voltage selector set to 220-240

the turntable cannot rotate, even though all
LEDs on the panel are dimly lit.

* This problem actually occurred
with a sample product.

The turntable does not rotate, even
though the unit is turned O

Is the voltage selector

properly switched?

Remove any foreign matter.

Is there any foreign
matter between the

turntable and motor?

Remove any foreign matter.

Is there any foreign
matter between the

turntable and motor?

Yes

Replace the PO

ER switch.

Does the PO

ER switch

201) on the

PLAY PCB Assy work?

Yes

Securely connect them.

Are C

901 and C

103 on

the D.D. MOTOR Assy

securely connected?

Yes

Replace the switch.

Does the PL/ST switch

202) on the

PLAY PCB Assy work?

Yes

Replace the faulty switches.

Do the tact switches
(S

203/204) on the

SPEED PCB Assy work?

Yes

The command is not input to the
CPU. Replace the MAI

PCB Assy

then the SPEED PCB Assy,
in that order.

Do the strobe patterns change

after the TEMPO RESET button

is set to O

then the [33]

or [45] button is pressed?

Yes

o The LED is in failure. Replace the

LED (D203/204) on the SPEED
PCB Assy or SPEED PCB Assy.

Does the [33] or [45] button

LED light or go dark when

the corresponding button

is pressed?

Yes

o The control system is in failure.

Replace the MAI

PCB Assy.

Does the START/STOP

button LED light when the

button is pressed?

Yes

The circuitry may have been
shorted out. Replace the
D.D. MOTOR Assy then the
MAI

PCB Assy, in that order.

Are the chip fuses (P03/05/06/07)

on the D.D. MOTOR Assy

intact (not blown)?

Yes

The circuitry may have been
shorted out. Replace the
D.D. MOTOR Assy then the
MAI

PCB Assy, in that order.

Some part may be in failure.
Replace the AC&PLAY PCB Assy, transformer, D.D. MOTOR Assy, then the
MAI

PCB Assy, in that order.

The motor or the control system may be in failure.
Replace the D.D. MOTOR Assy then the MAI

PCB Assy, in that order.

The motor may be in failure.
Replace the D.D. MOTOR Assy.

Is the chip fuse (P04) on

the D.D. MOTOR Assy intact

(not blown)?

o The circuitry may have been

shorted out. Replace the
AC&PLAY PCB Assy.

Is the fuse (FU01) on

the AC PCB Assy intact

(not blown)?

[1] Abnormality regarding startup

Содержание PLX-1000













































Результаты поиска

Содержание PLX-1000

Отзывы:

Похожие инструкции для PLX-1000

Бренды по названию

Популярные бренды

Pioneer PLX-1000, Руководство по обслуживанию

Результаты поиска

Содержание PLX-1000

Отзывы:

Похожие инструкции для PLX-1000

Бренды по названию

Популярные бренды