background image

75

PDR-W739

This connector (3P) uses the one installed in the product. 

CN901 

 CN33 (POWER SUPPLY Assy)

     Connector Assy (6P) : PG06KK2E30

CN501 

 CN1501 (MAIN Assy)

     21P FFC/30V : PDD1210

CN502 

 CN1502 (MAIN Assy)

     8P FFC/30V : PDD1211

1

1

1

2

3

CN301 

 CN1401 (MAIN Assy)

     15P FFC/30V : PDD1212

4

1

4

4

2

3

Remove the CD-R CORE Assy.

2

Replace four cables (       ~       ) for service and diagnose it.

1

Remove the CD-R CORE Assy. (Refer to the Disassembly of the CD-R CORE Assy and steps        to        of the Servo
Mechanism Block.

2

Replace seven cables (       ~       ) for service and diagnose it.

POWER SUPPLY
Assy

MAIN Assy

CD-R CORE Assy

CD-R CORE
Assy

CD-R CORE Assy 

 Other Assys

CN901 

 CN33 (POWER SUPPLY Assy)

     Connector Assy (6P) : PG06KK2E30

CN501 

 CN1501 (MAIN Assy)

     21P FFC/30V : PDD1210

CN502 

 CN1502 (MAIN Assy)

     8P FFC/30V : PDD1211

1

2

3

CN301 

 CN1401 (MAIN Assy)

     15P FFC/30V : PDD1212

4

CN101 

 CN1 (CD-R Pickup)

     32P FFC/30V : PDD1202

5

CN452 

 CN601 (SERVO MECHANISM Assy)

     Connector Assy (9P) : PG09KK-E35

6

CN453 

 CN501 (LOADING B Assy)

     Connector Assy (2P) : PG02KK-E35

7

CN451 

 CN501 (LOADING A Assy)

8

1

10

CD-R CORE Assy 

 Other Assys

1

2

3

4

5

6

7

8

7.1.4 DIAGNOSIS OF CD-R CORE ASSY

7.1.3 DIAGNOSIS OF 3CD MICROCHANGER MECHANISM and MAINASSY

When diagnosing the CD-R CORE Assy, use the following Flexible Cables and Connector Assys for service.

When diagnosing the 3CD Microchanger Mechanism and MAIN Assy, use the following Flexible Cables and 
Connector Assy for service. 
(When you diagnose only 3CD Microchanger Mechanism, the product operates with CD-R CORE ASSY removed. )

• Flexible Cables and Connector Assy for service

• Flexible Cables and Connector Assys for service

1

7

Insulation Sheet, etc.

Caution :

Note :
The cable                  is the same as the cable for service for PDR-509.

5 6 7

Содержание PDR-W739




























































































Отзывы: