Pioneer PDP-V402, Техническое руководство

Страница: 171 / 185

171
11) Baud-rate setting
Operation is the same as with other input functions. With the remote control, use the
5
and
∞
buttons to select the
item to be set, and confirm your selection with the SET button. With the operation panel, select the item with the + and
– buttons, then confirm your selection with the SET button. This function selects the communication rate (baud rate) for
external RS-232C communications.
The factory-preset value is 4800BPS.
12) RGB2 priority mode setting
Operation is the same as with other input functions. With the remote control, use the
5
and
∞
buttons to select the
item to be set, and confirm your selection with the SET button. With the operation panel, select the item with the + and
– buttons, then confirm your selection with the SET button.
With the mode set to ON, the function automatically changes over to RGB2 (Dsub) when a signal is input (Note) into
RGB2 (Dsub). When there is no input signal for RGB2 (Dsub), the function is automatically restored to the previous one.
(Note) As it is operated based on whether there is HD or a composite sink, this function does not operate in case of Gon
Sync signal.
The factory-preset value is OFF.
Integrator mode
U B A R D E A T
1 2 0 0 B P S
2 4 0 0 B P S
4 8 0 0 B P S
9 6 0 0 B P S
9 1 2 0 0 B P S
T
A U
R
O
2
G B
O F F
N O