Pioneer PDP-V402, Техническое руководство

Страница: 110 / 185

109
6) Setting the optimal angle
This metal fixture is infinitely variable in a 25
°
range. This
work requires two workers.
1. Loosen the left and right screws
c
of the vertical
frame.
2. Lowering the arm, press against the display to get
the best angle.
3. When the desired angle is achieved, tighten the
screws
c
on both sides.
When the monitor is flat against the wall, use screws to
connect the variable side and fixed side of the hook fixture
shown above. (Use screws in
a
.) Tighten the left-and
right-side screws
c
.
a
c
X
How to mount standard optional items (PDK-4006)
Wire, flat bar
After setting the angle, use screws
a
and a wire or flat bar to prevent
the frame from opening.
Measure the degree of opening relative
to the wall, X, to obtain the standard for
the set angle.
X Angle
117 mm 5
°
173 mm 10
°
229 mm 15
°
282 mm 20
°
When the tilted angle is 5 degrees or less, make sure to secure it using wires or flat bars.