Pioneer PDP 502MX, Руководство пользователя

Страница: 11 / 143

11
~
CONTROL IN/OUT terminals
For connection to Pioneer products that have the
Î
mark.
If you connect a CONTROL (If CONTROL connection is
carried out) then you can carry out system control of the
display.
(NOTE) This product does not support RU-V107 wired
remote control units.
!
RS 232C terminal
Used to make adjustments from PC. (Conforms to EIA-
232-F.)
(Refer to 5.5 RS-232C Adjustment Mode.)
@
AUDIO INPUT (Stereo mini jack)
Audio input for use when the picture input uses INPUT 3
or INPUT 4. Connect to the audio output terminal of the
device that is connected to INPUT 3 or INPUT 4 of the
display.
#
AUDIO INPUT
Audio input for use when the image input uses INPUT 1
or INPUT 2. Connect to the audio output terminal of the
device that is connected to INPUT 1 or INPUT 2 of the
display.
INPUT 4
$
INPUT 4 input terminal
Used to input an analog RGB signal or a component picture
signal.
(NOTE) Also supports Green on Sync.
This terminal supports Microsoft Plug & Play (VESA DDC
1/2B).
%
INPUT 4 output terminal
Signals fed to the INPUT 4 input terminal (
$
) are output
from this terminal. No signal is sent when power is
switched off, or in standby status.
(NOTE) When connecting this unit, take a total
of five other units as the standard number
that can be set to receive input from it.
However, when inputting/outputting to/
from separate sync or composite sync,
the source sync level at the end terminal
must be 2.2 k
Ω
, and over 4.8 Vp-p.
INPUT 3
^
G(Y)/B(C
B
/P
B
)/R(C
R
/P
R
)
Receives signals from RGB or video hardware.
(NOTE) Also supports Green on Sync.
&
HD (H/V SYNC)
Receives signals of HD, and H/V Sync.
*
VD
Receives a VD signal.
Controls and Connectors
(
Sync Signal Impedance switch
Used to switch impedance for items
&
and
*
.
INPUT 2
)
S-VIDEO input terminal
_
Y/C Separate Video Input terminal
Receives signals from the Y/C separate video.
(Supports S2 output.)
(NOTE) Don't connect the S-jack and the BNC
terminal at the same time. Doing so will
result in system malfunctions or
breakdown.
INPUT 1
+
Video Input terminal
Outputs signals received by the video input terminal.
¡
Video Output terminal
Video input terminal (
+
) are output from this terminal.
Will not output when the power is off or in standby status.
(NOTE) When connecting this unit, take a total
of five other units as the standard number
that can be set to receive input from it.
™
Main Power switch
Turns the main power on or off.
£
AC INLET
Using the power cord accessory, connects to the AC
power source.
¢
SPEAKER
Output terminal for a left-hand external speaker.
Connected to speakers of 8 to 16
Ω
inpedance.