background image

Enjoying DTV broadcasts

09

40

En

Activating the Favourites function

After having registered your favourite channels, make sure to 
activate this function to select them. Use the following procedure.

1

Press HOME MENU.

2

Select “Setup” (

/

 then ENTER).

3

Select “DTV Setup” (

/

 then ENTER).

4

Select “Channel Setup” (

/

 then ENTER).

• The password entry screen appears. Enter your four-digit 

password using buttons 

0

 to 

9

.

5

Select “Channel Change” (

/

 then ENTER).

6

Select “Favourites List” (

/

).

7

Press HOME MENU to exit the menu.

 Note

• With favourites channels registered, you can select them by 

pressing 

P+

/

P– 

on the remote control unit or 

C/– 

on 

the plasma television.

• To display all available DTV channels for reception, select 

“Programme List” in step 6 then press 

P+

/

P–

 on the remote 

control unit or 

C/– 

on the plasma television for 

channel selection.

Parental Control

With the Parental Control, adults can prevent children from 
watching inappropriate TV programmes. When an attempt is made 
to watch a blocked programme, the plasma television shows 
nothing but a message. Parental Control functions for digital TV 
channels.

1

Press HOME MENU.

2

Select “Setup” (

/

 then ENTER).

3

Select “DTV Setup” (

/

 then ENTER).

4

Select “Channel Setup” (

/

 then ENTER).

• The password entry screen appears. Enter your four-digit 

password using buttons 

0

 to 

9

.

5

Select “Parental Control” (

/

 then ENTER).

6

Select the desired rating and change the setting (

/

).

7

Press HOME MENU to exit the menu.

Parental Rating options

You can choose from the following options to block TV 
programmes:

No Block

• All programmes can be watched without any age limitation.

Block All

• All programmes are blocked.

General and above

• For general audiences. Not specifically designed for children 

but all ages are allowed.

Parental Guidance and above

• Some material may not be suitable for children. Parental 

guidance suggested.

Mature and above

• Mature audience 15+. Programmes are blocked for children 

under 15.

Mature Adult and above

• Specifically designed for adults. Some material may be 

inappropriate for children under 15.

Adult Violence and above

• Programmes are blocked for children under 15 as these 

programmes contain strong violent content. 

Restricted and above

• Programmes contain inappropriate content for children under 18. 

 Note

• You can select “DTV Setup” only while viewing DTV channels.

• The Parental Control setup becomes effective when you first 

tune in a TV channel after entering the settings.

• When you select the Parental Rating option other than “No 

Block”, the password entry screen appears depending on the 
programme received. Enter your four-digit password using 
buttons 

0

 to 

9

 (see page 49).

• When you select “No Block”, Parental Control does not 

function in any way.

Reconfiguring the DTV channel settings

This section describes how to reconfigure the DTV channel 
settings after setting up DTV channels using Auto Installation 
(page 27). You can select “DTV Setup” only while viewing DTV 
channels.

 Note

• You can select “DTV Setup” only while viewing DTV channels.

Favourites

Channel Change

Parental Control

No Block

Parental Setup

Содержание PDP-428XDA













































































Отзывы: