Setting up
08
37
En
Power Management (PC source only)
The system will be automatically placed into the standby mode
when no signal is received from the PC.
1
Press HOME MENU.
2
Select “Power Control” (
/
then ENTER).
3
Select “Power Management” (
/
then ENTER).
4
Select “Mode1” or “Mode2” (
/
then ENTER).
5
Press HOME MENU to exit the menu.
Note
• This function is not selectable when the PC is connected to
the HDMI terminal.
Power Management
Selections
Off (default)
No power management
Mode1
• Places the system into the standby mode
when no signal is received from the
personal computer for eight minutes.
• Even when you start using the computer
and a signal is received again, the system
stays off.
• The system is switched on again by
pressing
STANDBY/ON
on the plasma
television or
on the remote control unit.
Mode2
• Places the system into the standby mode
when no signal is received from the
personal computer for eight seconds.
• When you start using the computer and a
signal is input again, the system is
switched on.
• The system is switched on again by
pressing
STANDBY/ON
on the plasma
television or
on the remote control unit.
Содержание PDP-428XDA
Страница 1: ...Operating Instructions PLASMA TELEVISION ...
