1 Use Multi-Control to select frequency
and the Q factor display.
Frequency and the Q factor (e.g.,
F 80 Q 1W
)
appears in the display.
2 Push Multi-Control left or right to select
the desired frequency.
Each pushing
Multi-Control
left or right se-
lects frequencies in the following order:
Low:
40
80
100
160
(Hz)
Mid:
200
500
1k
2k
(Hz)
High:
3.15k
8k
10k
12.5k
(Hz)
3 Push Multi-Control up or down to select
the desired Q factor.
Each pushing
Multi-Control
up or down se-
lects Q factor in the following order:
2N
1N
1W
2W
Note
If you make adjustments,
CUSTOM
curve is up-
dated.
Adjusting bass and treble
You can adjust bass and treble settings.
!
If EQ-EX function has been selected and
EQ-EX turned on and
CUSTOM
selected as
the equalizer curve, you can adjust bass
and treble settings.
!
If SFEQ has been set to
FRT1
, bass adjust-
ment affects only the rear output: front out-
put cannot be adjusted.
!
If SFEQ has been set to
FRT1
or
FRT2
, tre-
ble adjustment affects only the front out-
put: rear output cannot be adjusted.
1 Use Multi-Control to select Bass (bass
and treble level adjustment).
Bass
appears in the display.
#
If the treble level has been previously ad-
justed,
Treble
will be displayed.
2 Push Multi-Control left or right to select
bass or treble.
Pushing
Multi-Control
left and
Bass
is dis-
played. Pusing
Multi-Control
right and
Treble
is displayed.
3 Push Multi-Control up or down to ad-
just the level.
Each pushing
Multi-Control
up or down in-
creases or decreases the selected bass or tre-
ble level.
+6
6
is displayed as the level is
increased or decreased.
4 Turn Multi-Control clockwise to select
Bass (bass and tleble frequency adjust-
ment).
Bass
appears in the display.
#
If the treble frequency has been previously ad-
justed,
Treble
will be displayed.
5 Push Multi-Control left or right to select
the desired frequency.
Each pushing
Multi-Control
left or right se-
lects frequencies in the following order:
Bass:
40
63
100
160
(Hz)
Treble:
2.5k
4k
6.3k
10k
(Hz)
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Use Multi-Control to select Loud.
Loud
appears in the display.
2 Press Multi-Control to turn loudness
on.
Loudness level (e.g.,
Loud MID
) appears in
the display.
Audio Adjustments
En
50
Section
11