Pioneer ND-BT1, Руководство по обслуживанию

Страница: 21 / 27

ND-BT1/E5
21
5 6 7 8
5 6
7
8
C
D
F
A
B
E
Display Operation Method
Bring the cursor to [TX Frequency], and push [OK] button.
As the selectable frequencies will be displayed on the right side
of the screen, bring the cursor by using up/down cursor and
push [OK] button.
00 : 2 402 MHz (default value)
27 : 2 441 MHz
4E : 2 480 MHz
Press [Ret] key to return to the top screen of Local TX (No
Modulated) Test.
* On the top screen, " [OK] Exec " is displayed on the lower left
position of the screen.
Push [OK] button on the top screen, and take measurement
using a spectrum analyzer.
Apply a probe to [ANT] land on the PCB, and check if any
carrier is displayed at the designated frequency band.
Furthermore, make sure that carrier is displayed at each of the
three bands.