Pioneer ND-BT1, Руководство по обслуживанию, Страница: 20 / 27

ND-BT1/E5
20
1 2 3 4
1 2 3 4
C
D
F
A
B
E
Spectrum analyzer supporting 2.4 GHz AVIC-HD1/EW5, AVIC-Z1/UC ND-BT1/E5
4. Procedure for test mode startup
Display Operation Method
-
Bluetooth Test Mode (using spectrum analyzer)
1. Cautions
If there is a spectrum analyzer supporting 2.4 GHz at the service site, confirmation of
transmission carrier becomes possible.
Since ND-BT1/E5 cannot operate singly, the AVIC-HD1/EW5 or AVIC-Z1/UC is required.
Carrier existence is checked by removing the product case and applying the probe onto
the "ANT" land of the base unit.
Since it is done by probe connection, the level cannot be confirmed accurately.
2. Function outline
Simple operation check on Bluetooth is executed in test mode using a spectrum analyzer
supporting 2.4 GHz.
Output check on Bluetooth unit
3. Configuration diagram
Enter the test mode using a product connectable to ND-BT1/E5.
When the test screen is displayed, select [Bluetooth Unit Test]
from the menu.
1) Loop Back(TX) Test (Not used for servicing.)
2) Page Scan Test (Not used for servicing.)
3) Inquily Scan Test (Not used for servicing.)
4) Local TX Test (Not used for servicing.)
5) Local TX(No Modulated) Test (Not used for servicing.)
5) Select Local TX(No Modulated) Test.