Pioneer MVH-X460UI, Руководство пользователя

Страница: 5 / 40

Black plate (5,1)
Radio
Basic operations
Selecting a band
1
Press BAND / until the desired band ( FM1 ,
FM2 , FM3 for FM or MW/LW ) is displayed.
Switching preset stations
1
Turn LEVER .
!
Select PCH (preset channel) under SEEK to
use this function.
Manual tuning (step by step)
1
Turn
LEVER
.
!
Select MAN (manual tuning) under SEEK to
use this function.
Seeking
1
Turn and hold down LEVER .
!
While turning and holding down LEVER , you
can skip stations. Seek tuning starts as soon
as you release
LEVER
.
Notes
!
For details about SEEK , refer to SEEK (LEVER
tuning setting) on page 5.
!
This unit
’
s AF (alternative frequencies
search) function can be turned on and off.
AF should be off for normal tuning operation
(refer to
AF (alternative frequencies search)
on page 5).
Storing and recalling stations
for each band
Using preset tuning buttons
1 To store: Press and hold down one of the
preset tuning buttons (1/ to 6/ ) until
the number stops flashing.
2 To recall: Press one of the preset tuning
buttons (1/ to 6/ ).
Switching the display
Selecting the desired text information
1
Press DISP to cycle between the following:
!
FREQUENCY (program service name or
frequency)
!
BRDCST INFO (program service name/PTY
information)
!
CLOCK (source name and clock)
Notes
!
If the program service name cannot be ac-
quired in
FREQUENCY , the broadcast fre-
quency is displayed instead. If the program
service name is detected, the program serv-
ice name will be displayed.
!
Depending on the band, text information can
be changed.
!
Text information items that can be changed
depend on the area.
Using PTY functions
You can tune in to a station using PTY (program
type) information.
Searching for an RDS station by PTY information
1
Press (list).
2
Turn M.C. to select a program type.
NEWS/INFO
—
POPULAR
—
CLASSICS
—
OTHERS
3
Press M.C. to begin the search.
The unit searches for a station broadcasting
that type of program. When a station is found,
its program service name is displayed.
!
To cancel the search, press M.C. again.
!
The program of some stations may differ
from that indicated by the transmitted PTY.
!
If no station is broadcasting the type of
program you searched for,
NOT FOUND
is
displayed for about two seconds and then
the tuner returns to the original station.
PTY list
For more details about PTY list, visit the follow-
ing site:
http://www.pioneer.eu/eur/products/25/121/tech/
CarAudio/PTY.html
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
Once selected, the following functions can be
adjusted.
#
If MW/LW band is selected, only BSM , LOCAL
and SEEK are available.
BSM (best stations memory)
BSM (best stations memory) automatically stores
the six strongest stations in the order of their sig-
nal strength.
1
Press M.C. to turn BSM on.
To cancel, press M.C. again.
REGIONAL (regional)
When AF is used, the regional function limits the
selection of stations to those broadcasting region-
al programs.
1
Press M.C. to turn the regional function on or
off.
LOCAL (local seek tuning)
Local seek tuning allows you to tune in to only
those radio stations with sufficiently strong sig-
nals for good reception.
1
Press M.C. to select the desired setting.
FM: OFF
—
LV1
—
LV2
—
LV3
—
LV4
MW/LW: OFF
—
LV1
—
LV2
The highest level setting allows reception of
only the strongest stations, while lower levels
allow the reception of weaker stations.
TA
(traffic announcement standby)
1
Press M.C. to turn traffic announcement
standby on or off.
AF (alternative frequencies search)
1
Press M.C. to turn AF on or off.
NEWS (news program interruption)
1
Press M.C. to turn the NEWS function on or
off.
SEEK (LEVER tuning setting)
You can assign a function to the LEVER on the
unit.
Select
MAN (manual tuning) to tune up or down
manually or select PCH (preset channel) to switch
between preset channels.
1
Press M.C. to select MAN or PCH .
USB storage device
MTP connection
MTP-compatible Android devices (running
Android OS 4.0 or higher) can be connected by
MTP connection using the USB source. To con-
nect an Android device, use the cable that came
with the device.
Notes
!
This function is not compatible with
MIXTRAX.
!
This function is not compatible with WAV.
English
Using this unit
5
Section
Using this unit
En
02
<QRD3244-A>5