Pioneer MVH-AV175, Руководство пользователя

Страница: 14 / 112

14
1 Display the “
Radio settings
” screen.
 Displaying the “Radio settings” screen on page 14
2 Touch [
TA Interrupt
] to switch “
On
” or “
Off
”
(default).
Receiving news announcements
The news can be received from the last selected frequency, inter-
rupting the other sources.
1 Display the “
Radio settings
” screen.
 Displaying the “Radio settings” screen on page 14
2 Touch [
News Interrupt
] to switch “
On
” or “
Off
”
(default).
Receiving alarm broadcasts
The alarm broadcast can be received from the last selected
frequency, interrupting the other sources.
1 Display the “
Radio settings
” screen.
 Displaying the “Radio settings” screen on page 14
2 Touch [
Alarm Interrupt
] to switch “
On
”
(default) or “
Off
”.
p
By keeping pressing and holding or , you can
perform non stop seek tuning. If you press again, non stop
seek tuning is canceled and the preset channel is switched.
Starting procedure
1 Press .
2 Touch [
Radio
].
The “
Radio
” screen appears.
Searching by PTY information
You can tune into a station using PTY (Program Type
Identification) information.
1 Touch .
2 Touch or
to select the item.
The following items are available:
News&Info (default), Popular , Classics , Others .
3 Touch to start searching.
 If you touch [ Cancel ], the searching process is
canceled.
Storing the strongest broadcast
frequencies
The BSM (best stations memory) function automatically stores
the six strongest broadcast frequencies under the preset tuning
keys “ 1 ” to “ 6 ”.
p
Storing broadcast frequencies with BSM may replace those
you have already saved.
p
Previously stored broadcast frequencies may remain stored
if the number of frequencies stored has not reached the
limit.
1 Touch .
2 Touch to begin a search.
While the message is displayed, the six strongest broadcast
frequencies will be stored under the preset tuning keys in order
of their signal strength.
 If you touch [ Cancel ], the storage process is
canceled.
Displaying the “Radio settings”
screen
1 Press .
2 Touch , and then
.
3 Touch [ AV Source Settings ].
4 Touch [
Radio Settings
].
Tuning into strong frequencies
p
You can use this function when “
Radio
” is selected as the
source.
Local seek tuning allows you to only tune into those radio sta-
tions with sufficiently strong signals.
1 Display the “ Radio settings ” screen.

Displaying the “Radio settings” screen on page 14
2 Touch [
Local
].
3 Touch the item you want to set.
●
Off (default):
Turns the seek tuning setting off.
●
Level1 to Level4 :
Sets the level of sensitivity for FM to Level1 to Level4 (for
AM Level1 or Level2 ).
p
The FM “ Level4 ” (AM “ Level2 ”) setting allows reception of
only stations with the strongest signals.
Setting the FM or AM tuning
step
You can switch the tuning step for FM or AM band.
p
For FM band, the seek tuning step is fixed to 50 kHz.
p
The tuning step remains at 50 kHz during manual tuning.
1 Turn the source off.

Source on the Top menu screen on page 9
2 Display the “
Radio settings
” screen.
 Displaying the “Radio settings” screen on page 14
3 Touch [FM Step] or [AM Step] to switch the
tuning step.
The following items are available for each setting:
FM Step
●
100kHz (default)
●
50kHz
AM Step
●
9kHz (default)
●
10kHz
Setting the alternative fre-
quency search
When the tuner cannot get a good reception, tunes to another
broadcast station that supports the same program in the current
network.
1 Display the “
Radio settings
” screen.
 Displaying the “Radio settings” screen on page 14
2 Touch [ Alternative FREQ ] to switch “ On ” or
“ Off ” (default).
Setting the Auto PI search
When you switch to the broadcast station containing RDS data,
searches for the same PI (Program Identification) code broad-
cast station from all frequency band automatically.
1 Turn the source off.
 Source on the Top menu screen on page 9
2 Display the “ Radio settings ” screen.

Displaying the “Radio settings” screen on page 14
3 Touch [
Auto PI
] to switch “
On
” or “
Off
”
(default).
p
Even if you set to “
Off
”, the PI search is automatically per-
formed when the tuner cannot get a good reception.
Limiting stations to regional
programing
You can switch whether the area code is checked during the
auto PI search.
1 Display the “
Radio settings
” screen.
 Displaying the “Radio settings” screen on page 14
2 Touch [ Regional ] to switch “ On ” (default) or
“ Off ”.
Receiving traffic announce -
ments (TA)
The traffic announcement can be received from the last selected
frequency, interrupting the other sources.
< CRD4876-A > < CRD4876-A >
Radio
< CRD4876-A > 14