You can set
Auto Answer
and
Ring Tone
from this
menu. For details, refer to
Connection
(phone connection)
Operate the Bluetooth telephone connection menu.
Refer to
Function and operation
1
Display Phone Function.
Refer to
2
Press M.C. to display the function
menu.
3
Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Auto Answer
(automatic answering)
1
Press
M.C.
to turn automatic answering on or off.
Ring Tone
(ring tone select)
1
Press
M.C.
to turn the ring tone on or off.
Audio Adjustments
1
Display the audio menu.
Refer to
2
Turn M.C. to select the audio function.
After selecting, perform the following proce-
dures to set the audio function.
Fader/Balance
(fader/balance adjustment)
1
Press
M.C.
to display the setting mode.
2
Push
M.C.
up or down to adjust the front/rear
speaker balance.
Adjustment range (front/rear):
Front 15
to
Rear
15
3
Push
M.C.
left or right to adjust the left/right
speaker balance.
Adjustment range (left/right):
Left 15
to
Right 15
!
Select
F/R 0
when only using two speakers.
!
When the rear output setting and preout setting
are
Subwoofer
, you cannot adjust front/rear
speaker balance.
Sonic Center Control
(sonic center control)
Sound that is suited for the listening position can ea-
sily be created with this function.
1
Press
M.C.
to display the setting mode.
2
Push
M.C.
left or right to select a listening posi-
tion.
Adjustment range:
Left:7
to
Right:7
Auto EQ
(auto-equalizer on/off)
The auto-equalizer is an equalizer curve created by
auto EQ (refer to
32).
You can turn the auto-equalizer on or off.
1
Press
M.C.
to turn the auto-equalizer on or off.
You cannot use this function if auto EQ has not been
carried out.
Graphic EQ
(equalizer adjustment)
En
27
Section
03
Operating
this
unit
Operating this unit
