Pioneer MVH-1450UB, Руководство пользователя

Страница: 9 / 88

This setting allows you to switch your source to
USB / iPod automatically.
1
Press
M.C.
to turn the plug and play function
on or off.
ON
–
When a USB storage device/iPod is con-
nected, depending on the type of device, the
source is automatically switched to
USB / iPod
when you turn on the engine. If you disconnect
your USB storage device/iPod, this unit
’
s
source is turned off.
OFF
–
When a USB storage device/iPod is con-
nected, the source is not switched to USB /
iPod automatically. Please change the source
to
USB
/
iPod
manually.
REAR-SP
(rear output setting)
The rear speaker leads output can be used for full-
range speaker or subwoofer connection.
If you switch to
SW
, you can connect a rear speak-
er lead directly to a subwoofer without using an
auxiliary amp.
Initially,
REAR-SP is set for rear full-range speaker
connection ( FUL ).
1
Press
M.C.
to select the desired setting.
FUL
—
SW
!
Even if you change this setting, there will
be no output if you select
OFF in SUB.W
(Refer to SUB.W (subwoofer on/off setting)
on the previous page).
!
If you change this setting, subwoofer out-
put in the audio menu will return to the fac-
tory settings.
PREOUT (preout setting)
The RCA outputs can be used for rear speaker or
subwoofer connection.
If you switch to
SW , you can connect a rear speak-
er lead directly to a subwoofer without using an
auxiliary amp.
Initially,
PREOUT is set for rear full-range speaker
connection ( SW ).
1
Press
M.C.
to select the desired setting.
SW
—
REA
!
Even if you change this setting, there will
be no output if you select
OFF in SUB.W
(Refer to SUB.W (subwoofer on/off setting)
on the previous page).
!
If you change this setting, subwoofer out-
put in the audio menu will return to the fac-
tory settings.
DEMO (demo display setting)
1
Press M.C. to turn the demo display on or off.
SCROLL (scroll mode setting)
When ever scroll is set to ON , recorded text infor-
mation scrolls continuously in the display. Set to
OFF if you prefer the information to scroll just
once.
1
Press
M.C.
to turn the ever scroll on or off.
Switching the dimmer setting
You can adjust the brightness of illumination.
%
Press and hold .
Using an AUX source
1 Insert the stereo mini plug into the AUX
input jack.
2 Press SRC/OFF to select AUX as the
source.
Note
AUX cannot be selected unless the auxiliary set-
ting is turned on. For more details, refer to
AUX
(auxiliary input) on the previous page.
Turning the clock display on
or off
%
Press /DISP OFF to turn the clock dis-
play on or off.
#
The clock display disappears temporarily when
you perform other operations, but the clock display
appears again after 25 seconds.
Turning the display off or on
%
Press and hold /DISP OFF until the dis-
play turns off and on.
English
Operating this unit
9
Section
Operating this unit
En
02