Pioneer MD-P100, Руководство по обслуживанию

Страница: 37 / 50

37
MD-P100
Pin No. Pin Name I/O Function and Operation
91 BCK I Bit clock (2.8224MHz) signal input from CXD2535CR (IC200)
92 C2PO I C2PO (indicate the error mode of the data) signal input from CXD2535BR (IC200)
When playback:C2PO (“H”), When digital recording:D.IN-Vflag,
When analog recording:”L”
93 DATA I/O When recording:Record audio data signal output (Not used this set)
When playback:Playback audio data signal input from CXD2535CR (IC200)
94 DIDT I 16-bit data input terminal for the digital audio in Not used this set (Fixed at “L”)
95 DODT O 16-bit data output terminal for the digital audio out Not used this set (OPEN)
96 DIRCPB O Disc drive,Record or playback mode output of the EFM encoder/decoder
Not used this set (OPEN)
97 MIN I Defect ON/OFF selection signal input from CXD2535CR (IC200)
98 SPOSL I IN/OUT selection input terminal of the pin 87 (“L”:IN,”H”:OUT) (Fixed at”H”)
99 MCK O Internal master clock signal output terminal of the RAM controller
100 VSS Ground terminal
100
1
25
50
26
51
75
76
CXD2536R
CS4330E-CSR