3 Press
c
or
d
to select cut-off frequency.
Each press of
c
or
d
selects cut-off frequen-
cies in the following order:
50
80
125
(Hz)
Only frequencies higher than those in the se-
lected range are output from the front or rear
speakers.
Note
If you switch the SFEQ setting, the HPF function
is automatically turned off. By turning the HPF
function on after selecting the SFEQ setting, you
can combine HPF function with SFEQ
function.
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
!
Settings are based on the volume level of
the FM tuner, which remains unchanged.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Press AUDIO to select SLA.
Press
AUDIO
until
SLA
appears in the display.
3 Press
a
or
b
to adjust the source vo-
lume.
Each press of
a
or
b
increases or decreases
the source volume.
SLA +4
SLA
4
is displayed as the source vo-
lume is increased or decreased.
Notes
!
Since the FM tuner volume is the control, it is
not possible to apply source level adjustments
to the FM tuner.
!
The AM tuner volume level can also be ad-
justed with source level adjustments.
!
The CD player and the multi-CD player are set
to the same source level adjustment volume
automatically.
!
External unit 1 and external unit 2 are set to
the same source level adjustment volume
automatically.
Using automatic sound
levelizer
During driving, noise in the car changes ac-
cording to the driving speed and road condi-
tions. The automatic sound levelizer (ASL)
monitors such varying noise and automati-
cally increases the volume level, if this noise
becomes greater. The sensitivity (variation of
volume level to noise level) of ASL can be set
to one of five levels.
1 Press AUDIO to select ASL.
Press
AUDIO
until
ASL
appears in the display.
2 Press
a
to turn ASL on.
ASL Mid
appears in the display.
#
To turn ASL off, press
b
.
3 Press
c
or
d
to select the desired ASL
level.
Each press of
c
or
d
selects ASL level in the
following order:
Low
(low)
Mid-Lo
(mid-low)
Mid
(mid)
Mid-Hi
(mid-high)
High
(high)
Audio Adjustments
En
28
Section
07
HHHHHHHHHHHHHH
