Additional information
10
46
En
Error Messages
No HDMI video output
• Make sure that you’ve selected this player as the HDMI input in the settings for
the component you’re using (refer to the component’s instruction manual).
• Check that the HDMI cable is connected properly and isn’t damaged.
• Check that components connected using the HDMI interface are switched on
and HDMI compatible (Components must be compatible with both DVI and High
Bandwidth Digital Content Protection (HDCP)).
• Depending on the component you have connected, using a DVI connection may
result in unreliable signal transfers.
• Make sure the resolution on this player matches that of the component you have
connected using HDMI. See
Video Output settings
on page 29 to change the HDMI
resolution.
• If the screen goes blank after changing the resolution, it means the you selected
a resolution incompatible with your monitor. See
Resetting the HDMI connection
on page 36 to reset to the factory defaults.
Color problems occur
with your monitor after
changing the
HDMI
Color
setting (page 30).
• Depending on the connected equipment, some
HDMI Color
settings may cause
the picture to be displayed incorrectly. In this case, use the TV’s own video input
settings to select RGB, if possible. Alternatively, revert to the previous
HDMI Color
setting.
Problem
Remedy
Message
Description
EXTRAPWR
• You cannot adjust SFC modes, tone controls (bass, treble, and bass boost),
MP3 Expander mode, Voice Enhancer mode when using Extra Power mode
.
SND.DEMO
• The sound demo is on. See
General
in
Troubleshooting
on page 43.
CANNOT
• An operation is prohibited because
DVD/CD
or
USB
isn’t selected, headphones
are connected, or
SHIFT+TEST TONE
is pressed during disc playback.
MUTING
• An operation is prohibited because the sound is muted (press
MUTE
).
STEREO
• An operation is prohibited because the
DVD/CD
or
USB
function isn’t selected.
TRAYLOCK
• The tray lock is on. See
General
in
Troubleshooting
on page 43.
KEYLOCK
• The key lock is enabled. See
Setting the Key Lock
below.
USB ERR
• See
Important
in
Using the USB interface
on page 25 for more on this.
HDMI ERR
• See
HDMI connection
above for troubleshooting tips. See also
Resetting the
HDMI connection
on page 36 if the problem persists.
EEP ERR
• Contact your Pioneer authorized service center or your dealer for servicing.
EXIT
• Appears when any prohibited signal is input or the headphones are connected
while the menu screen is displayed, and then the display returns to the normal
display.
NO MIC
• Appears when you press
SHIFT
+
KARAOKE
,
SHIFT
+
ECHO
,
SHIFT
+
or
SHIFT
+
when no mic is inserted.
MIC IN
• Appears when you press
SURROUND
,
SOUND
,
FRT. SURR/EXT PWR
or
MP3
EXP/V.ENH
when a mic is inserted.
HTZ170_171_270_272_En.book 46 ページ ２００８年２月２８日 木曜日 午後１時２４分
Содержание HTZ170DVD
Страница 1: ...Operating Instructions ...
Страница 52: ...D3 4 2 1 7c_A_ChH D3 4 2 2 2a_A_ChH ...
