POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement.
S002*_En
CAUTION
This product is a class 1 laser product, but this
product contains a laser diode higher than Class 1.
To ensure continued safety, do not remove any covers
or attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel.
The following caution label appears on your unit.
Location: top of the unit
CLASS 1
LASER PRODUCT
D3-4-2-1-8*_C_En
Operating Environment
Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light)
D3-4-2-1-7c*_A1_En
If
the
AC
plug
of
this
unit
does
not
match
the
AC
outlet
you
want
to
use,
the
plug
must
be
removed
and
appropriate
one
fitted.
Replacement
and
mounting
of
an
AC
plug
on
the
power
supply
cord
of
this
unit
should
be
performed
only
by
qualified
service
personnel.
If
connected
to
an
AC
outlet,
the
cut
-
off
plug
can
cause
severe
electrical
shock.
M
ake
sure
it
is
properly
disposed
of
after
removal.
The
equipment
should
be
disconnected
by
removing
the
mains
plug
from
the
wall
socket
when
left
unused
for
a
long
period
of
time
(for
example,
when
on
vacation).
D3-4-2-2-1a_A1_En
HTZ585DVD_EN.book 3 ページ ２００９年３月１９日 木曜日 午後６時３５分
Содержание HTZ-FS30DVD
Страница 65: ......
