Listening to your system
4
4
26
2
34
4
a.
You can change the Sound Retriever feature at any time by
using
S.RETRIEVER
button.
b.
The default setting when the
USB
input is selected is
ON
.
c.
This setting works only with dual mono encoded Dolby Digital
and DTS soundtracks.
d.
This is not displayed by default. You need to change some
settings on this unit to display the menu. (see
Displaying the
Fixed PCM Setting menu
on page 27
).
e.
The initial set
AUTO
is only available for Dolby TrueHD signals.
Select
MAX
or
MID
for signals other than Dolby TrueHD.
f.
You shouldn’t have any problems using this with most SACD
discs, but if the sound distorts, it is best to switch the gain
setting back to
0
dB.
g.
This feature is only available when the connected display
supports the automatic audio/video synchronizing capability
(‘lip-sync’) for HDMI. If you find the automatically set delay
time unsuitable, set
A.DLY
to
OFF
and adjust the delay time
manually. For more details about the lip-sync feature of your
display, contact the manufacturer directly.
h.
Only available with 2-channel sources in
DOLBY PLII MUSIC
mode.
i.
Only when listening to 2-channel sources in
NEO:6 CINEMA
and
NEO:6 MUSIC
mode.
LFE ATT
(LFE Attenuate)
Some Dolby Digital and DTS audio sources
include ultra-low bass tones. Set the LFE
attenuator as necessary to prevent the ultra-
low bass tones from distorting the sound from
the speakers.
The LFE is not limited when set to 0 dB,
which is the recommended value. When set
to –15 dB, the LFE is limited by the
respective degree. When OFF is selected, no
sound is output from the LFE channel.
0
(0 dB)
5 (–5 dB)
10 (–10 dB)
15 (–15 dB)
20 (–20 dB)
** (OFF)
SACD G.
(SACD Gain)
f
Brings out detail in SACDs by maximizing the
dynamic range (during digital processing).
0
(0 dB)
+6 (+6 dB)
HDMI
(HDMI Audio)
Specifies the routing of the HDMI audio
signal out of this receiver (
AMP
) or through to
a TV (
THRU
). When
THRU
is selected, no
sound is output from this receiver.
AMP
THRU
A.DLY
(Auto Delay)
g
This feature automatically corrects the audio-to-
video delay between components connected
with an HDMI cable. The audio delay time is set
depending on the operational status of the
display connected with an HDMI cable. The
video delay time is automatically adjusted
according to the audio delay time.
OFF
ON
C.WIDTH
(Center Width)
h
(Applicable only when using a center speaker)
Spreads the center channel between the front right
and left speakers, making it sound wider (higher
settings) or narrower (lower settings).
Making the C.WIDTH setting “7” may cause no
sound to be output from the center channel.
0 to 7
Default:
3
DIMEN.
(Dimension)
h
Adjusts the surround sound balance from
front to back, making the sound more distant
(minus settings), or more forward (positive
settings).
–3 to +3
Default:
0
Setting/What it does
Option(s)
PNRM.
(Panorama)
h
Extends the front stereo image to include
surround speakers for a ‘wraparound’ effect.
OFF
ON
C.IMG
(Center Image)
i
(Applicable only when using a center speaker)
Adjust the center image to create a wider
stereo effect with vocals. Adjust the effect
from
0
(all center channel sent to front right
and left speakers) to
10
(center channel sent
to the center speaker only).
0 to 10
Default:
3
(NEO:6 MUSIC),
10
(NEO:6
CINEMA)
Setting/What it does
Option(s)
HTP-074_En.book 26 ページ ２０１６年４月２５日 月曜日 午前１０時１２分
