Pioneer HTP-072, Руководство по обслуживанию

Страница: 38 / 93

3 8
HTP-072
1 2 3 4
A
B
C
D
E
F
1 2 3 4
Microcomputers update
PC
UPDATE jig
GGF1646
USB cable
A type <-> B type
USB cable
(HDMI/CEC microcomputer)
10P
Connect as shown in the figure below.
Insert the FFC with its contact surface facing the
"
mark.
[Procedures]
for MAIN microcomputer
1. Unplug the AC cord.
Connect the FFC cable. ( MAI
N microcomputer )
Start up application FlashSta on the PC.
3. Press the OK button.
[ if the following messages are displayed ]
Please push the cancel button and press the JIG's
RESET button.
And confirm a connection of FFC.
Please return to procedure 1.
2. Plug the AC cord. (STA N DBY mode)
For updating of the MAI N microcomputer, proceed with
the following steps in STA N DBY mode.
10P to 10P FFC
Select for COM port.
4. Select the update file and enter ID.
1
Selection of upgrade file
1
Select the update file
2
Enter ID.
Select "VSX324 Main V1xx.mot" file
to update the MCU.
2
Enter ID.
Enter "ff" in all field.
Press the OK button.
Press the OK button.
3
Press OK button to
go to next step.
Rear side
10P