En
Please see the following section for
speaker connection instructions. Refer to
Connections when using the speaker input
wire.
f
System remote control wire (sold
separately)
Note
INPUT SELECT
switch must be set. For details,
see
Setting the unit
.
Before connecting the
@LOKHÆDQ
WARNING
Secure the wiring with cable clamps or adhe-
sive tape. To protect the wiring, wrap sections
in contact with metal parts in adhesive tape.
Never cut the insulation of the power supply
to feed power to other equipment. Current
capacity of the wire is limited.
CAUTION
If the system remote control wire of the
amplifier is connected to the power terminal
via the ignition switch (12 V DC), the amplifier
will remain on with the ignition whether the
headunit is on or off, which may exhaust
battery if the engine is at rest or idling.
Install and route the separately sold marine
grade battery wire, marine grade ground wire,
speaker wires and the amplifier as far away
as possible from the radio antenna, antenna
cable, tuner and any communications equip-
ment and wiring.
ANTSÐRTHS@AKDÐRODBHÆB@SHNMÐ
of speaker
Regarding the speaker to be connected to the
amplifier, use a speaker having a rated input
capacity more than the rated output capacity
of the amplifier. If this condition is not met,
there is a risk of fire, smoke, or damage. The
VSHDNHULPSHGDQFHLVWR
