En
Normal mode)
100 W × 6 (at 14.4 V, 4
:
,
+]WRN+]7+'
High power mode)
100 W × 6 (at 14.4 V, 2
:
,
N+]7+'+LJK
power mode)
200 W × 3 (at 14.4 V, 4
:
,
0212N+]7+'
High power mode)
Load impedance ................. 4
:
(2
:
to 8
:
allowable)
Frequency response ............... 10 Hz to 50 kHz (+0 dB, –3 dB)
Signal-to-noise ratio ........... 95 dB (IHF-A network)
Distortion ............................
:N+]
Low pass filter:
Cut off frequency ........ 50 Hz to 500 Hz
Cut off slope ................ –12 dB/oct
High pass filter:
Cut off frequency ........ 50 Hz to 500 Hz
Cut off slope ................ –12 dB/oct
Gain control:
RCA .............................. 0.2 V to 6.5 V
Speaker ........................ 0.8 V to 16 V
Maximum input level / impedance:
RCA .............................. 6.5 V / 25 k
:
Speaker ........................ 16 V / 12 k
:
"3 Ä2ODBH×B@SHNMR
Power output....................... 75 W RMS × 6 Channels (at
14.4 V, 4
:
,
20 Hz to 20 kHz
DQG7+'11RUPDO
mode)
100 W RMS × 6 Channels
(at 14.4 V, 4
:
,
20 Hz to 20
N+]DQG7+'1
High power mode)
S/N ratio ............................... 75 dBA (reference: 1 W into
4
:
)
Accessories
Speaker line input RCA cable × 3
Hexagonal wrench × 1
Mounting screw (4 × 25 mm) × 4
Logo Badge× 1
Fuse cover × 1
Cover for RCA Terminal × 6
Notes
Specifications and design are subject to mod-
ification without notice.
The average current consumption is nearly
the maximum current consumption by this
unit when an audio signal is input. Use this
value when working out total current con-
sumption by multiple power amplifiers.
