En(10/10)
Additional information
2ODBHÆB@SHNMR
Power source ...................... 14.4 V DC (10.8 V to 15.1 V
allowable)
Grounding system .............. Negative type
Current consumption ......... 26 A (at continuous power,
4
:
)
Average current consumption
.......................................... 5.8 A (4
:
for four channels)
6.6 A (2
:
for four channels)
Fuse ..................................... 30 A
Dimensions (W × H × D) .. 243 mm × 46.8 mm ×
105 mm
(9-5/8 in. × 1-7/8 in. ×
4-1/8 in.)
Weight ................................. 1.4 kg (3.1 lbs)
(Leads for wiring not
included)
Continuous power output .. 75 W × 4 (at 14.4 V, 4
:
,
+]WRN+]7+'
75 W × 4 (at 14.4 V, 2
:
,
N+]7+'
150 W × 2 (at 14.4 V, 4
:
,
0212N+]7+'
Load impedance ................. 4
:
(2
:
to 8
:
allowable)
Frequency response ........... 10 Hz to 50 kHz (+0 dB,
–3 dB)
Signal-to-noise ratio ........... 95 dB (IHF-A network)
Distortion ............................
:N+]
Low pass filter:
Cutoff frequency ......... 50 Hz to 500 Hz
Cutoff slope ................. –12 dB/oct
High pass filter:
Cutoff frequency ......... 50 Hz to 500 Hz
Cutoff slope ................. –12 dB/oct
Gain volume:
RCA .............................. 0.2 V to 6.5 V
Speaker ........................ 0.8 V to 16 V
Maximum input level / impedance:
RCA .............................. 6.5 V / 25 k
:
Speaker ........................ 16 V / 12 k
:
Waterproof .......................... JIS/IEC protection class
7 (IPX7) equivalent
(self-certified)
Dustproof ............................ JIS/IEC protection class
6 (IP6X) equivalent
(self-certified)
"3 Ä2ODBH×B@SHNMR
Power output....................... 75 W RMS × 4 Channels (at
14.4 V, 4
:
,
20 Hz to 20 kHz
DQG7+'1
S/N ratio .............................. 75 dBA (reference: 1 W into
4
:
)
Accessories
Power cable × 1
Speaker line input RCA cable × 2
Hexagonal wrench × 1
Mounting screw (4 × 25 mm) × 4
Supplied tool × 1
Notes
Specifications and design are subject to mod-
ification without notice.
The average current consumption is nearly
the maximum current consumption by this
unit when an audio signal is input. Use this
value when working out total current con-
sumption by multiple power amplifiers.
