Specifications
Power source
.............................
14.4 V DC (10.8 V to 15.1 V
allowable)
Grounding system
...................
Negative type
Current consumption
............
55 A (at continuous power,
4
W
)
Average current consumption
.....................................................
6 A (4
W
)
Fuse
................................................
30 A × 3
Dimensions (W × H × D)
...
315 mm × 60 mm ×
200 mm
(1 ft. × 2-3/8 in. × 7-7/8 in.)
Weight
..........................................
3.2 kg (Leads for wiring not
included)
Maximum power output
.......
150 W × 4 + 700 W (4
W
),
200 W × 4 + 1 200 W (2
W
)
(2 000 W TOTAL)
Continuous power output
...
75 W × 4 + 350 W (at 14.4 V,
4
W
)
200 W × 2 + 350 W (at
14.4 V, 4
W
)
100 W × 4 + 600 W (at
14.4 V, 2
W
)
Load impedance
......................
4
W
(2
W
to 8
W
allowable)
Frequency response:
A/B CH:10 Hz to 50 kHz
SUB CH:10 Hz to 500 Hz
Signal-to-noise ratio
...............
94 dB (IEC-A network)
Distortion
.....................................
0.05 % (10 W, 1 kHz)
Low pass filter:
(A/B CH)
Cut off frequency
...........
40 Hz to 500 Hz
Cut off slope
.....................
–
12 dB/oct
(SW)
Cut off frequency
...........
40 Hz to 500 Hz
Cut off slope
.....................
–
12 dB/oct,
–
24 dB/oct
High pass filter:
(A/B CH)
Cut off frequency
...........
40 Hz to 500 Hz
Cut off slope
.....................
–
12 dB/oct
Bass boost:
(SW)
Frequency
..........................
50 Hz
Level
.....................................
0 dB to 18 dB
Gain control:
RCA
......................................
200 mV to 6.5 V
Speaker
..............................
0.8 V to 16 V
Maximum input level / impedance:
RCA
......................................
6.5 V / 25 k
W
Speaker
..............................
16 V / 12 k
W
CEA2006 Specifications
Power output
.............................
75 W RMS × 4 + 350 W x 1
RMS ( 4
W
and
≦
1 % THD
+N)
S/N ratio
.......................................
75 dBA (reference: 1 W into
4
W
)
Notes
!
Specifications and the design are subject to
modifications without notice.
!
The average current consumption is nearly
the maximum current consumption by this
unit when an audio signal is input. Use this
value when working out total current con-
sumption by multiple power amplifiers.
<15090317101>16
En
16
Appendix
Additional information