Four-channel / Three-channel output
!
Slide
INPUT SELECT
(input select) switch
to
4CH
position.
2
1
4
3
5
1
RCA input jack A
2
RCA input jack B
3
Connecting wires with RCA plugs (sold sepa-
rately)
4
From car stereo (RCA output)
If only one input plug is used, e.g. when the
car stereo has only one output (RCA output),
connect the plug to RCA input jack A rather
than B.
5
INPUT SELECT
(input select) switch (
4CH
po-
sition)
Two-channel output (Stereo) / (Mono)
!
Slide
INPUT SELECT
(input select) switch
to
2CH
position.
1
2
3
4
1
RCA input jack A
For two-channel output, connect the RCA
plugs to the RCA input jack A.
2
Connecting wire with RCA pin plugs (sold se-
parately)
3
From car stereo (RCA output)
4
INPUT SELECT
(input select) switch (
2CH
position)
Connections when using
the speaker input wire
Connect the car stereo speaker output wires
to the amplifier using the supplied speaker
input wire with RCA pin cord.
1
Car Stereo
2
Speaker output
3
Red: Right
+
4
Black: Right
*
5
Black: Left
*
6
White: Left
+
7
Speaker input wire with RCA pin cord
To the RCA input jack of this unit
Notes
!
If speaker wires with an RCA pin cord from a
headunit are connected to this amplifier, the
amplifier will automatically turn on when the
headunit is turned on. When the headunit is
turned off, the amplifier turns off automati-
cally. This function may not work with some
headunits. In such cases, please use a sys-
tem remote control wire (sold separately). If
multiple amplifiers are to be connected to-
gether synchronously, connect the head unit
and all amplifiers via the system remote con-
trol wire.
!
Connect the system remote control wire when
you wish to only turn on the car stereo, not the
amplifier.
En
9
English
Section
03
Connecting the units
Содержание GM-D8604
Страница 43: ...Ptbr 43 Português B ...