Pioneer GM-D1004, Руководство пользователя

Страница: 6 / 84

Black plate (6,1)
!
If the system remote control wire of the ampli-
fier is connected to the power terminal via the
ignition switch (12 V DC), the amplifier will re-
main on with the ignition whether the car
stereo is on or off, which may exhaust battery
if the engine is at rest or idling.
!
Install and route the Power cord, ground wire,
speaker wires and the amplifier as far away as
possible from the antenna, antenna cable and
tuner.
The point of connector
attachment/detachment
!
Push in the connector until a clicking
sound, and connect it certainly.
!
When you remove the connector, hold the
connector portion and pull it. When the
cord is pulled, the cord may be pulled out
from the connector.
About suitable
specification of speaker
Ensure speakers conform to the following
standards, otherwise there is a risk of fire,
smoke or damage. Speaker impedance is 2
W
to 8
W
, or 4
W
to 8
W
for two-channel and other
bridge connections.
Subwoofer
Speaker channel Power
Four-channel output
Nominal input:
Min. 45 W
Two-channel output
Nominal input:
Min. 90 W
Three-channel Front
speaker out Nominal input:
Min. 45 W
Three-channel Rear
speaker out Nominal input:
Min. 90 W
Other than subwoofer
Speaker channel Power
Four-channel output
Max. input:
Min. 100 W
Two-channel output
Max. input:
Min. 200 W
Three-channel Front
speaker out Max. input:
Min. 100 W
Three-channel Rear
speaker out Max. input:
Min. 200 W
<5707000009400>6
En
6
Section
03
Connecting the units