About this unit
CAUTION
!
Do not allow this unit to come into contact
with liquids. Electrical shock could result.
Also, this unit damage, smoke, and overheat
could result from contact with liquids.
!
Keep this manual handy as a reference for op-
erating procedures and precautions.
!
Always keep the volume low enough so that
you can hear sounds from outside the vehicle.
!
Protect this unit from moisture.
!
If the battery is disconnected or discharged,
the preset memory will be erased and must be
reprogrammed.
!
If this unit does not operate properly, contact
your dealer or nearest authorized Pioneer Ser-
vice Station.
This unit is a TV tuner for reception of TV
broadcasts. Combining it with a separately
sold display with AV-BUS lets you enjoy TV en-
tertainment (refer to this unit
s installation
manual for details concerning the AV-BUS).
This unit features a
REAR OUT
, letting you
watch TV on a rear display (sold separately).
Video system of a
connected component
This unit is NTSC/PAL-M system compatible.
When connecting an external component to
this unit
s
REAR OUT
, be sure the component
is compatible with the same video systems. If
it is not, images will not be correctly repro-
duced.
WARNING:
!
Be sure to stop driving and park your vehicle
in a safe place before watching the TV.
!
Watching the TV while driving is dangerous
and could result in an accident.
!
This unit
s
REAR OUT
is for connection of a
display to enable passengers in the rear seats
to watch the TV.
NEVER
install the rear display in a location
that enables the driver to watch the TV while
driving.
About this manual
This unit features a number of sophisticated
functions ensuring superior reception and op-
eration. All the functions have been designed
for the easiest possible use, but many are not
self-explanatory. This operation manual will
help you benefit fully from this unit
s potential
and to maximize your listening enjoyment.
We recommend that you familiarize yourself
with the functions and their operation by read-
ing through the manual before you begin
using this unit. It is especially important that
you read and observe
WARNING
s and
CAU-
TION
s in this manual.
Resetting the microprocessor
Pressing
RESET
lets you reset the micropro-
cessor to its initial settings.
The microprocessor must be reset under the
following conditions:
!
Prior to using this unit for the first time
after installation
!
If the unit fails to operate properly
!
When strange or incorrect messages ap-
pear on the display
!
When setting the position of the operation
mode switch on this unit
Before You Start
En
5
English
Section
02
