Pioneer FH-X500UI, Руководство пользователя

Страница: 20 / 80

Black plate (20,1)
Common
Message Cause Action
AMP ERROR Unit fails to op-
erate or speaker
connection is
incorrect; pro-
tective circuit is
activated. Check the speak-
er connection. If
the message fails
to disappear even
after the engine is
switched off/on,
contact your deal-
er or an author-
ized Pioneer
Service Station
for assistance.
CD player
Message Cause Action
ERROR-07,
11, 12, 17, 30 The disc is dirty. Clean the disc.
The disc is
scratched. Replace the disc.
ERROR-07,
10, 11, 12,
15, 17, 30,
A0 There is an elec-
trical or me-
chanical error. Turn the ignition
switch OFF and
back ON, or
switch to a differ-
ent source, then
back to the CD
player.
ERROR-15 The inserted
disc is blank. Replace the disc.
ERROR-23 Unsupported
CD format. Replace the disc.
FORMAT
READ
Sometimes
there is a delay
between the
start of playback
and when you
start to hear any
sound. Wait until the
message disap-
pears and you
hear sound.
Message Cause Action
NO AUDIO The inserted
disc does not
contain any
playable files. Replace the disc.
SKIPPED
The inserted
disc contains
DRM protected
files. The protected
files are skipped.
PROTECT All the files on
the inserted
disc are em-
bedded with
DRM. Replace the disc.
USB storage device/iPod
Message Cause Action
FORMAT
READ Sometimes
there is a delay
between the
start of playback
and when you
start to hear any
sound. Wait until the
message disap-
pears and you
hear sound.
NO AUDIO There are no
songs. Transfer the audio
files to the USB
storage device
and connect.
The connected
USB storage de-
vice has secur-
ity enabled. Follow the USB
storage device in-
structions to dis-
able the security.
SKIPPED The connected
USB storage de-
vice contains
DRM protected
files. The protected
files are skipped.
Message Cause Action
PROTECT All the files on
the connected
USB storage de-
vice are em-
bedded with
DRM. Replace the USB
storage device.
N/A USB The connected
USB device is
not supported
by this unit.
!
Connect a USB
Mass Storage
Class compliant
device.
!
Disconnect
your device and
replace it with a
compatible USB
storage device.
CHECK USB The USB con-
nector or USB
cable has short-
circuited. Check that the
USB connector or
USB cable is not
caught in some-
thing or dam-
aged.
CHECK USB The connected
USB storage de-
vice consumes
more than maxi-
mum allowable
current. Disconnect the
USB storage de-
vice and do not
use it. Turn the
ignition switch to
OFF, then to ACC
or ON and then
connect only
compliant USB
storage devices.
Message Cause Action
CHECK USB The iPod oper-
ates correctly
but does not
charge. Make sure the
connection cable
for the iPod has
not shorted out
(e.g., not caught
in metal objects).
After checking,
turn the ignition
switch OFF and
back ON, or dis-
connect the iPod
and reconnect.
ERROR-19 Communication
failed. Perform one of
the following op-
erations.
–
Turn the ignition
switch OFF and
back ON.
–
Disconnect the
USB storage de-
vice.
–
Change to a dif-
ferent source.
Then, return to
the USB source.
iPod failure. Disconnect the
cable from the
iPod. Once the
iPod
’
s main
menu is dis-
played, reconnect
the iPod and reset
it.
ERROR-23
USB storage de-
vice was not for-
matted with
FAT12, FAT16 or
FAT32. USB storage de-
vice should be for-
matted with
FAT12, FAT16 or
FAT32.
Additional information
20
Appendix
Additional information
En
<QRD3222-A>20