4
OIL LEAKAGE CHECK
The bearing oil and mechanical seal oil are
each sealed by a shaft lip seal, and a vent
to atmosphere exists between these two lip
seals to indicate oil leak from either cavity.
If either the bearing oil or mechanical seal
oil lip seal leaks, oil will leak from the
vent. This vent should be checked for
leakage prior to pump operation.
CAUTION!!!
If equipment is stored more than twelve (12) months, some of the components or lubricants
may have exceeded their maximum shelf life. These must be inspected and replaced as
necessary prior to pump operation to ensure proper pump performance.
RECORDING MODEL & SERIAL NUMBERS
Record the model and serial number for your
Pioneer Pump
in the spaces provided below.
The factory will need this information when you require parts or service.
PumpModel:____________________________________
PumpSerialNumber:_______________________________
Engine/MotorSerial#_______________________________
Engine/Motor Mgf: __________________________________
WARRANTY INFORMATION
Pioneer Pump’s current terms and conditions, including limited warranty policy, can be found on our
website http://www.pioneerpump.com from the homepage by selecting More > Resources > Terms and
Conditions or by following this link:
http://pioneerpump.com/media/232391/M5132_Pioneer_Standard_Terms_and_Conditions-1-.pdf
