Pioneer Elite VSX-39TX Скачать руководство пользователя страница 84 | Manualshive

Страница: 84 / 92

background image

84

Techno Tidbits & Problem-solving

Dolby Digital

Digital
sound

2

4

6

8

10

12

14 MHz

Frequency

Analog
sound
(Monaural)

Video

Dolby Digital
sound

Dolby Digital is a compression format which records
the sound of 6 or 8 channels of the theater surround
system (Dolby Digital) on the movie film digital track.
Of the 6-8 channels, the sub woofer channel is
intended for bass only, and because the frequency
range is smaller than a main channel, the overall
soundtrack is expressed as 5.1 or 7.1 channels.
Dolby Digital is the name of the Dolby surround multi-
channel digital system that was developed after the
Dolby Surround System and Dolby Pro Logic Surround
System.

The number of movies made using Dolby Digital since
1992 has exceeded 300 and continues to increase.
For compact disc players and laser disc digital sounds,
16 bits are used to sample the original analog audio
waveform and sampling is carried out 44,100 times
every second. However because an enormous
amount of recording signal data is required for the
multi channel system with this method, Dolby Digital
is used to compress the data.
In reproducing audio signals, the smaller the bit
number used, the lower the sound quality. With Dolby
Digital, drop in auditory sound quality is prevented by
using masking technology and digital filtering
technology based on the human auditory
characteristics.

Laser disc format

Laser discs are now available on the market in large
numbers. This means that the recording of different
format audio signals on the laser disc raises the
important question of compatibility with existing laser
discs. Dolby Digital tracks on laser discs record signals
using the space of one analog audio channel so it will
maintain compatibility with existing discs and players.
As shown in the following figure, the digital audio
sounds of Dolby Digital discs can be played back as
currently done. Analog sounds are played back by
using the other channel without the Dolby Digital
signals for monaural audio signals.

Comparison with Dolby Pro Logic
Surround

Dolby Digital is also known as the 5.1 channel system.
It is equipped with 5 channels (front left, front right,
center, surround left, surround right) in the frequency
range from 20 Hz to 20 kHz and an independent Low
Frequency Effect (LFE) channel. The subwoofer
channel is also called Low Frequency Effect (LFE).
The subwoofer channel can be used as desired to
enjoy strong bass sounds.

5.1 channel digital
surround track

4 channel analog sound
track (Matrix)

Dolby

Digital

encoding

Dolby Digital for movie films

1

«
...
82
83
84
85
86
...
»

Содержание Elite VSX-39TX





























































































Отзывы:

Нет отзывов

Похожие инструкции для Elite VSX-39TX

Бренд: Ramsey Electronics Страницы: 28

Бренд: Vemco Страницы: 2

Бренд: Vemco Страницы: 2

Бренд: Icom Страницы: 73

Sat-Light 7410F

Бренд: Foxcom Страницы: 74

Бренд: Alinco Страницы: 16

Бренд: Grundig Страницы: 25

Freeview TRF-7150

Бренд: Topfield Страницы: 78

Бренд: WHD Страницы: 4

Бренд: Nav TV Страницы: 8

Бренд: Yaesu Страницы: 15

Бренд: Strong Страницы: 20

Бренд: Sound Storm Страницы: 12

Бренд: Jensen Страницы: 28

IVA D105 - DVD Player With LCD Monitor

Бренд: Alpine Страницы: 83

Бренд: X-Digital System Страницы: 11

Бренд: REFI Multimedia Страницы: 32

Бренд: Boss Audio Systems Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды