112
VSX-39TX, VSX-37TX, VSX-36TX, VSX-D909S
Display
All the display information is explained and /or referenced here.
DIGITAL
dB
PRO LOGIC
STEREO
DSP
MIDNIGHT
LOUDNESS
ATT
SIGNAL
SELECT OVER
H.P
AC-3 DTS MPEG
ANALOG SP
AB
MONO STEREO
TUNED AMFM
L
C
R
LFE
LS
S
RS
DIGITAL
AC-3RF
AUTO
TAPE 2
MPEG
VOLUME
1
2 3 4 5
6
7
8
9
10
11
13
14
15
12
7 MIDNIGHT indicator
Lights when the MIDNIGHT LISTENING mode is on.
8 DSP indicator
Light when a DSP or Advanced Theater modes are
selected.
9 STEREO indicator
Lights when a STEREO modes are selected.
10 Radio Frequency/Function indicator
Displays the function or the frequency of the current
radio station.
11
/ dts mode indicators
DIGITAL :
When the
/dts mode on the receiver is on,
this indicator lights to indicate playback of a Dolby Digital
signal. However,
PRO LOGIC lights during 2 channel
playback of Dolby Digital.
PRO LOGIC :
When the
/dts mode on the receiver is
on, this indicator lights during 2 channel playback.
DTS :
When the
/dts mode on the receiver is on, this
indicator lights to indicate playback of a DTS signal.
THX:
Lights when the HOME THX CINEMA mode is
selected.
12 MASTER VOLUME indication
Displays current volume level.
13 TAPE 2 indicator
Lights when the TAPE 2 monitor is on.
14 Character display
Shows current mode, status, etc.
15 TUNER indicators
MONO
: Lights when the tuner is set to receive FM
broadcasts and when selected MPX mode.
STEREO
: Lights when a FM stereo broadcast is
received in the auto stereo mode.
TUNED
: Lights when a broadcast is received.
AM/FM
: Light to indicate the current band
(FM or AM).
1 SIGNAL SELECT indicators
Light to indicate the input signal you selected.
ANALOG :
Lights when analog signals are assigned.
DIGITAL :
Lights when digital audio signals are selected.
AC-3 RF :
Lights when AC-3 RF signals are assigned.
AUTO :
Lights when the receiver is set to select the input
signal automatically.
2 Program Format indicators
AC-3 :
Lights when a source with Dolby Digital signals is
played.
DTS :
Lights when a source with DTS audio signals is
played.
For Dolby Digital or DTS sources :
These indicators
change according to which channels are active in the
source. When all three LS (left surround), S (surround)
and RS (right surround) light at the same time it means
a source
with Surround EX or DTS-ES flag is being
used.
L –
Left front channel.
C –
Center channel.
R –
Right front channel.
LS –
Left surround channel.
S –
Surround channel (mono).
RS –
Right surround channel.
LFE –
Low Frequency Effects channel.
3 Analog level indicators
OVER –
When the source signal is analog, this lights if
the signal is in danger of distorting. Press INPUT ATT
on the front panel to lower the signal level.
ATT –
Lights when INPUT ATT is used to reduce the
level of the analog source signal.
4 Speaker indicators
Light to indicate the current speaker system, A and/or
B.
5 LOUDNESS indicator
Lights when the LOUDNESS mode is on.
6 H.P (headphones)
Lights when headphones are connected to the
PHONES jack (speakers systems A and B both turn off
automatically).
Содержание Elite VSX-36TX
Страница 43: ...VSX 39TX VSX 37TX VSX 36TX VSX D909S 43 A B C D 5 6 7 8 5 6 7 8 3 5 Y AUDIO SIGNAL ROUTE ...
Страница 47: ...VSX 39TX VSX 37TX VSX 36TX VSX D909S 47 A B C D 5 6 7 8 5 6 7 8 AUDIO SIGNAL ROUTE Y 2 5 ME Y 4 5 MQ 5 5 Y ...
Страница 97: ...97 VSX 39TX VSX 37TX VSX 36TX VSX D909S ...
Страница 103: ...VSX 39TX VSX 37TX VSX 36TX VSX D909S 103 A B C D 1 2 3 4 1 2 3 4 SIDE B K1 K2 K12 K13 K18 K6 K7 EL HON GND VDD ...