Pioneer Elite VSX-36TX, Руководство по обслуживанию

Страница: 110 / 120

110
VSX-39TX, VSX-37TX, VSX-36TX, VSX-D909S
STANDARD – Use for pure decoding of multi channel
sources, especially Dolby Digital, Dolby Pro Logic, DTS
sources. Each press toggles between STANDARD and
STANDARD 7.1 mode (for use with SURROUND BACK
speakers) and STANDARD auto (the receiver chooses
the appropriate STANDARD mode). Those with surround
back speakers can use all three STANDARD modes,
those without can only use the STANDARD mode.
3 MULTI CH INPUT
Use to hook up an external component that can decode
other types of signals and input them into the VSX-
39TX.
4 TONE control buttons
TONE button
This button has two functions. Firstly, it switches
between TONE ON and TONE BYPASS, which bypasses
the tone circuitry. Secondly, you need to press the
button before using the CHANNEL SELECT buttons to
adjust the BASS & TREBLE (cannot be used in THX or
MULTI CH IN modes).
CHANNEL SELECT button
Switches the tone adjust controls between the FRONT,
CENTER, SURROUND and SURROUND BACK speak-
ers. You can then use the BASS and TREBLE controls to
adjust the sound.
BASS (–/+) button
Use to adjust low frequencies.
TREBLE (–/+) button
Use to adjust the high frequencies.
5 LOUDNESS button
Switches the LOUDNESS mode on or off (cannot be
used in THX or MULTI CH IN modes).
1 STANDBY/ON button
Press to switch the receiver ON or into
STANDBY mode.
STANDBY indicator
Lights when the receiver is in STANDBY mode. (Please
note that this receiver consumes a small amount of
power [1.0 W] in the standby mode.)
2 DSP MODE button
Press repeatedly to select a DSP sound mode. (HALL 1,
HALL 2, JAZZ, DANCE, THEATER 1, or THEATER 2, 5/7
CH STEREO). Use these modes to produce surround
sound from standard (two channel) stereo sources and
create different listening environments.
STEREO/DIRECT button
Switches the receiver into STEREO mode if it was in a
different sound mode (like DSP mode) or toggles
between DIRECT and STEREO mode. For more on
STEREO mode .
DIRECT playback bypasses the tone controls, DIGITAL
NR, LOUDNESS, MIDNIGHT and channel level for the
most accurate reproduction of a program source.
/ DTS buttons
THX CINEMA – Cycles through the THX CINEMA, THX
SURROUND EX or THX AUTO sound modes. If you
have THX-certified speaker setup or want to re-create a
THX-style sound environment. It is also appropriate for
Dolby Digital, Dolby Pro Logic, DTS sources. Those with
surround back speakers can use all three THX modes,
those without can only use the THX CINEMA mode.
ADVANCED – Use to select one of the four Advanced
Theater modes. Use to create certain types of sound
environments when listening to Dolby Digital, Dolby Pro
Logic, DTS sources.
VSX-D909S
STANDBY/ON
—
OFF
_
ON
DSP
MODE
INPUT
SELECTOR
MASTER
VOLUME
MIN MAX
THX CINEMA ADVANCED STANDARD
STANDBY
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
STEREO/
DIRECT
/DTS
PHONES
S-VIDEO VIDEO
MULTI CH
INPUT
SIGNAL
SELECT
RF ATT CLASS
TUNER CONTROL
BAND TUNING
STATION
FL
DIMMER
EON
MODE
TAPE 2
MONITOR
VIDEO
SELECT
TONE
CHANNEL
SELECT LOUDNESS
DIGITAL
NR
- +
- +
SPEAKERS - TREBLE + - BASS +
L AUDIO R
VIDEO INPUT
CHARACTER/
SEARCH
MEMORY
1 2 5 3 6 7 8 9
10 11 12 13 14 15
17
4
Front Section (VSX-D909S)