background image

 

English

 

9

 

En

 

SPEAKER LEVEL CONNECTION (

ı

ı

ı

ı

 

)

 

This is a connection to the speaker terminals on the 
stereo amplifier or receiver.

 

NOTES:

 

• When the power of the stereo amplifier is turned off 

before the power of this unit is switched off, a shock 
sound may be generated. In this case, lower the 
subwoofer volume or turn off the power of this unit. If 
the stereo amplifier has a switched outlet, connect 
the power cable of this unit to this outlet.

• When the subwoofer volume is set to an extremely 

high level, howling may be caused when the power of 
the stereo amplifier is turned off or when the speaker 
switch is turned on. To prevent this, lower the 
subwoofer volume or turn off the power of this unit 
before turning off the power of the stereo amplifier. 
Also, when using this unit at a high level, do not turn 
off the speaker switch of the stereo amplifier.

• Do not turn up the bass on the stereo amplifier or 

receiver.  If the stereo amplifier or receiver has no 
output margin, sound distortion is apt to occur.  
Adjust the bass level with the unit’s 

 

VOLUME

 

 knob.

• When the 

 

LINE LEVEL INPUT

 

 terminal is connected, 

the 

 

SPEAKER LEVEL INPUT

 

 terminals cannot be 

used.

Connect the unit to the stereo amplifier's or receiver's 
speaker terminals at the same time the left and right 
speakers are connected.
1. Use two sets of speaker cords (not supplied) to 
connect the Right speaker system and the 

 

SPEAKER 

LEVEL INPUT R

 

 of the S

 

-

 

W1EX to the right speaker 

terminals of the stereo amplifier/ receiver. Do the same 
for Left speaker system.

• Make sure 

 

L

 

 (

 

+

 

), 

 

L

 

 (

 

 

), 

 

R

 

 (

 

+

 

), 

 

R

 

 (

 

 

) are correctly 

aligned.

 

NOTE:

 

• If the stereo amplifier or receiver has 2 sets of speaker 

terminals (A, B) and these are connected to empty 
terminals on the unit and “A + B” is selected with the 
speaker switch, sound may not come out of the left/
right speakers, depending on the stereo amplifier or 
receiver being used (a stereo amplifier or receiver is 
constructed so that, when “A + B” is selected with 
the speaker switch, A and B are in series 
connection).

R

L

_

+

S-W1EX

_

+

R

_

+

L

_

+

_

+

S-W1EX

_

+

Stereo amplifier or Receiver

Amplifier's or Receiver's SPEAKERS terminals

Connect speaker 
cords 2 at a time.

To left speaker
 system

Speaker cords

To right speaker 
system

Right Speaker system

Left speaker system

Supplied AC power cord

To AC socket

CAUTION

These speaker terminals carry 

HAZARDOUS LIVE 

voltage

. To prevent the risk of electric shock when 

connecting or disconnecting the speaker cables, 
disconnect the power cord before touching any 
uninsulated parts.

 

D3-4-2-2-3_A_En

S-W1EX_En_SRD6034A.book Page 9 Tuesday, October 11, 2005 6:51 PM

Содержание Elite S-W1EX





















Отзывы: