63
En
Adjustments and Settings
11
En
gl
is
h
FOCUS
Focus shifts the sound-source direction (sound image) upward
and produces clear sound contours.
1
Press
HOME MENU
.
2
Select “Sound”. ( / then
ENTER
)
3
Select “FOCUS”. ( / )
4
Select the desired parameter. ( / )
5
Press
HOME MENU
again to exit the menu.
Front Surround
Front Surround provides three-dimensional sound effects and/
or a deep, rich bass.
1
Press
HOME MENU
.
2
Select “Sound”. ( / then
ENTER
)
3
Select “Front Surround”. ( / )
4
Select the desired parameter. ( / )
5
Press
HOME MENU
again to exit the menu.
NOTE
•
(WOW) FOCUS is on and T SRS is selected
for Front Surround
•
trademark of SRS Labs, Inc.
• WOW technology is incorporated under license from SRS
Labs, Inc.
Power Control
Power Control provides convenient power saving options.
Energy Save
There are three Energy Save modes to reduce power
consumption.
1
Press
HOME MENU
.
2
Select “Power Control”. ( / then
ENTER
)
3
Select “Energy Save”. ( / then
ENTER
)
4
Select “Save1”, “Save2” or “Picture Off”. ( / then
ENTER
)
5
Press
HOME MENU
again to exit the menu.
NOTE
• When the signal is coming from a PC, use the Home menu
to set this option.
No Signal off (AV mode only)
The system automatically enters Standby if no signal is
received for 15 minutes.
1
Press
HOME MENU
.
2
Select “Power Control”. ( / then
ENTER
)
3
Select “No Signal off”. ( / then
ENTER
)
4
Select “Enable”. ( / then
ENTER
)
5
Press
HOME MENU
again to exit the menu.
NOTE
• Five minutes before the system is placed into Standby, a
message appears as each minute counts down.
• The system may not enter Standby if the TV program signal
has a high video noise level.
Item
Description
Off
Deactivates FOCUS
On
Activates FOCUS
Item
Description
Off
Deactivates both SRS and TruBass
SRS
Reproduces highly effective three-dimensional sound
TruBass
(factory default)
Provides deep, rich bass using a new technology
T SRS
Provides both TruBass and SRS effects
Item
Description
Standard
Maximum picture brightness; may increase glass
panel buzzing
Save1
Slightly reduced power consumption and brightness;
optimal setting for most uses
Save2
Lowest power consumption; slightly decreased
brightness
Picture Off
Deactivates the screen to save power. To restore the
screen display, press any button other than
VOL +/–
and
MUTING
.
This setting is not memorized by the system.
Item
Description
Disable
(factory default)
Does not place the system into Standby
Enable
Places the system into Standby if no signal is
received for 15 minutes
PDP_PRO1540HD.book Page 63 Wednesday, August 2, 2006 6:01 PM
