Getting started
04
12
En
Chapter 4
Getting started
Switching on
After making sure that everything is connected
properly and that the player is plugged in, push
the
POWER
button into the
ON
position to
switch the player on.
• Press
CD PLAYER
on the remote to
switch the unit into standby.
Playing discs
The basic playback controls for playing CDs,
SACDs, and MP3/WMA discs are covered
here. Further functions are detailed in
1
If the player isn’t already on, press
POWER to switch it on.
2
Press
(OPEN/CLOSE) to open the disc
tray.
3
Load a disc.
Load a disc with the label side facing up, using
the disc tray guide to align the disc. Once
properly seated, press
to close the disc tray.
4
Press
(play) to start playback.
Basic playback controls
The table below shows the basic controls for
playing discs.
ON
OFF
POWER
S
TANDBY
PURE AUDIO
POWER
OFF
ON
CD PLAYER
OPEN/CLOSE
TIME
DIMMER
SACD/CD
PURE AUDIO
CLEAR
ENTER
LEGATO
LINK
1
2
3
4
5
6
7
8
0
9
CD PLAYER
OPEN/CLOSE
PURE AUDIO
1
2
3
4
5
6
7
8
0
9
ENTER
Button
What it does
Starts playback.
Pauses a disc that’s playing, or
restarts a paused disc.
/
(front panel
only)
Starts playback/stops a disc that’s
playing.
• While depressing
/
, press
(front panel only). Counting from the
first track on the disc, playback will
begin from the track number
corresponding to the number of
times
is pressed.
Stops playback.
Press to start fast reverse scanning.
Press
(play) to resume normal
playback.
Press to start fast forward scanning.
Press
(play) to resume normal
playback.
PD-D6MK2_en_SYXJ5.book 12 ページ ２００９年４月１５日 水曜日 午後５時２３分
