Pioneer Elite Kuro PRO-FPJ1, Руководство по эксплуатации

Страница: 29 / 155

29
ENGLISH
Getting Started
P
reparation
B
asic Operation
Settings
Troubleshootin
g
O
thers
Install1 > Input info.
a
Input info.
Sets whether to display the input when switching input.
5 sec Displays for 5 seconds.
Off Do not display.
Install1 > Flip H
b
Flip H
Select this when the image is projected from the back of the screen or when the projector is hung from the ceiling.
Off Do not flip image to the left or right.
On Flips image to the left or right.
Install1 > Flip V
c
Flip V
Select this when the projector is hung from the ceiling.
Off Do not flip image up or down.
On Flips image up or down.
Install1 > Fan Speed
d
Fan Speed
Select this when using the projector in a location of low atmospheric pressure (higher than 900 meters above sea level).
Normal Do not activate.
High Activate.
Install2 > Back Color
e
Back Color
Configures the screen color displayed when there is no input signal.
Blue Sets screen color to “Blue”.
Black Sets screen color to “Black”.
Install2 > No Signal Off
f
No Signal Off
Sets the lapse time before automatically switching to the standby mode when there is no input signal.
15 Switch to standby mode after 15 minutes.
30 Switch to standby mode after 30 minutes.
60 Switch to standby mode after 60 minutes.
Off Do not switch to standby mode.
PRO-FPJ1U_EN.book Page 29 Tuesday, February 19, 2008 9:09 AM